Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLE built from 2020 to 2026 (GLE 350, GLE 350 4MATIC, GLE 450 4MATIC, GLE 580 4MATIC).
Every 2020-2026 Mercedes-Benz GLE uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M15x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLE (V167) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLE 350 | 2020-2026 | 19x8 +61 20x8.5 +55 front / 20x8.5 +42 rear 20x9 +57 front / 20x9 +44 rear 21x10 +54 front / 21x11 +49 rear 22x10 +56.1 front / 22x11 +50 rear 22x10 +58 front / 22x11 +52 rear |
| GLE 350 4MATIC | 2020-2026 | 19x8.5 +42 20x8.5 +42 20x9 +44 21x11 +49 22x11 +50 |
| GLE 450 4MATIC | 2020-2026 | 19x8.5 +42 20x8.5 +42 20x9 +44 21x11 +49 22x11 +50 |
| GLE 580 4MATIC | 2020-2026 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2020-2026 Mercedes-Benz GLE from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +52 |
| 19x8 +61 |
| 19x8.5 +55 front / 19x8.5 +42 rear |
| 19x8.5 +55 |
| 20x8.5 +55 |
| 20x8.5 +55 front / 20x8.5 +42 rear |
| 20x8.5 +61 |
| 20x9 +57 front / 20x9 +44 rear |
| 21x10 +54 front / 21x11 +49 rear |
| 22x10 +56 front / 22x11 +50 rear |
| 22x10 +58 front / 22x11 +52 rear |
Widths and offsets with Verified Fitment on the 2020-2026 Mercedes-Benz GLE: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-24" | 8" | +31 to +67 |
| 19-24" | 8.5" | +38 to +60 |
| 19-24" | 9" | +44 to +54 |
Wider still: 19x10 +36 to +47; 20x10 +36 to +47; 21x10 +36 to +47; 22x10 +36 to +47; 23x10 +36 to +47; 24x10 +36 to +47 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Offset range |
|---|---|---|
| 19-24" | 8.5" | +38 to +52 |
| 19-24" | 9" | +44 to +54 |
Wider still: 19x10 +36 to +47; 20x10 +36 to +47; 21x10 +36 to +47; 22x10 +36 to +47; 23x10 +36 to +47; 24x10 +36 to +47 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Offset range |
|---|---|---|
| 18-24" | 8.5" | +38 to +60 |
| 18-24" | 9" | +44 to +54 |
Wider still: 18x10 +36 to +47; 19x10 +36 to +47; 20x10 +36 to +47; 21x10 +36 to +47; 22x10 +36 to +47; 23x10 +36 to +47… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Mercedes-Benz GLE. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.


Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)














Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)














Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2020-2026 Mercedes-Benz GLE (V167) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x7.5 +52; 19x8 +61; 19x8.5 +55 front / 19x8.5 +42 rear; 19x8.5 +55; 20x8.5 +55; 20x8.5 +55 front / 20x8.5 +42 rear; 20x8.5 +61; 20x9 +57 front / 20x9 +44 rear; 21x10 +54 front / 21x11 +49 rear; 22x10 +56 front / 22x11 +50 rear; 22x10 +58 front / 22x11 +52 rear.
Its wheel fasteners use a M15x1.25 thread.
Bolt-on sizes run from 18" to 24" in diameter; see the size table for the offset range at each width.