Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLE Coupe built from 2016 to 2019 (GLE450 AMG Coupe, AMG GLE43 Coupe, AMG GLE63 S Coupe).
Every 2016-2019 Mercedes-Benz GLE Coupe uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLE Coupe (C292) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| GLE450 AMG Coupe | 2016 |
| AMG GLE43 Coupe | 2017-2019 |
| AMG GLE63 S Coupe | 2016-2019 |
Wheel sizes Mercedes-Benz fitted to the 2016-2019 Mercedes-Benz GLE Coupe from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8.5 +38 |
| 19x8.5 +57 front / 19x8.5 +38 rear |
| 20x8.5 +29 |
| 20x8.5 +53 front / 20x8.5 +29 rear |
| 21x10 +52 front / 21x11 +38 rear |
| 21x11 +38 |
| 22x10 +56 front / 22x11 +40 rear |
| 22x11 +40 |
Widths and offsets with Verified Fitment on the 2016-2019 Mercedes-Benz GLE Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-22" | 8.5" | +12 to +48 | +12 to +43 |
| 19-22" | 9" | +18 to +54 | +18 to +37 |
| 19-22" | 9.5" | +25 to +50 | +25 to +31 |
Wider still: 19x10 front +10 to +49 / rear +10 to +30; 19x10.5 front +17 to +43 / rear +17 to +24; 20x10 front +10 to +49 / rear +10 to +30; 20x10.5 front +17 to +43 / rear +17 to +24; 21x10 front +10 to +49 / rear +10 to +30; 21x10.5 front +17 to +43 / rear +17 to +24… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2019 Mercedes-Benz GLE Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.










Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)





The 2016-2019 Mercedes-Benz GLE Coupe (C292) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x8.5 +38; 19x8.5 +57 front / 19x8.5 +38 rear; 20x8.5 +29; 20x8.5 +53 front / 20x8.5 +29 rear; 21x10 +52 front / 21x11 +38 rear; 21x11 +38; 22x10 +56 front / 22x11 +40 rear; 22x11 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.