Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLS built from 2017 to 2019 (GLS350d, GLS450, GLS550, GLS63 AMG).
Every 2017-2019 Mercedes-Benz GLS uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLS (X166) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLS350d | 2017 | See factory sizes below |
| GLS450 | 2017-2019 | 19x8.5 +62 20x8.5 +62 21x10 +46 |
| GLS550 | 2017-2019 | See factory sizes below |
| GLS63 AMG | 2017-2019 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2017-2019 Mercedes-Benz GLS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8.5 +62 |
| 20x8.5 +62 |
| 21x10 +46 |
| 22x10.5 +45 |
Widths and offsets with Verified Fitment on the 2017-2019 Mercedes-Benz GLS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-23" | 8.5" | +10 to +70 |
| 19-23" | 9" | +16 to +64 |
| 19-23" | 9.5" | +22 to +58 |
| 19-23" | 10" | +29 to +51 |
| 19-23" | 10.5" | +35 to +45 |
Wider still: 19x11.5 +27 to +38; 20x11.5 +27 to +38; 21x11.5 +27 to +38; 22x11.5 +27 to +38; 23x11.5 +27 to +38 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2019 Mercedes-Benz GLS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)
The 2017-2019 Mercedes-Benz GLS (X166) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x8.5 +62; 20x8.5 +62; 21x10 +46; 22x10.5 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 23" in diameter; see the size table for the offset range at each width.