Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLS built from 2026 to 2026 (GLS 450 4Matic, GLS 580 4Matic).
Every 2026 Mercedes-Benz GLS uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLS (X167) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| GLS 450 4Matic | 2026 |
| GLS 580 4Matic | 2026 |
Wheel sizes Mercedes-Benz fitted to the 2026 Mercedes-Benz GLS from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +29 |
| 18x8 +37 |
| 19x8.5 +31 |
| 19x8.5 +31 front / 19x10 +48 rear |
| 20x9 +34 |
| 20x9 +34 front / 20x10 +48 rear |
| 21x9 +34 front / 21x10 +48 rear |
Widths and offsets with Verified Fitment on the 2026 Mercedes-Benz GLS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-25" | 8.5" | +45 to +67 |
| 19-25" | 9" | +51 to +61 |
Wider still: 19x10 +43 to +54; 20x10 +43 to +54; 21x10 +43 to +54; 22x10 +43 to +54; 23x10 +43 to +54; 24x10 +43 to +54… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Mercedes-Benz GLS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2026 Mercedes-Benz GLS (X167) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +29; 18x8 +37; 19x8.5 +31; 19x8.5 +31 front / 19x10 +48 rear; 20x9 +34; 20x9 +34 front / 20x10 +48 rear; 21x9 +34 front / 21x10 +48 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 25" in diameter; see the size table for the offset range at each width.