Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SLK built from 2005 to 2011 (SLK280, SLK300, SLK350, SLK55 AMG).
Every 2005-2011 Mercedes-Benz SLK uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SLK (R171) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SLK280 | 2006-2008 | 16x7 +34 16x7 +34 front / 16x8 +30 rear 16x7 +37 front / 16x8 +30 rear 16x8 +30 17x7.5 +37 17x7.5 +36 front / 17x8.5 +30 rear 17x7.5 +37 front / 17x8.5 +34 rear 17x8.5 +30 17x8.5 +34 18x7.5 +36 18x7.5 +36 front / 18x8.5 +30 rear 18x7.5 +37 front / 18x8.5 +34 rear 18x8.5 +30 18x8.5 +34 |
| SLK300 | 2009-2011 | 16x7 +37.5 16x7 +38 |
| SLK350 | 2005-2011 | 17x7.5 +36 17x7.5 +37 17x8.5 +30 17x8.5 +34 18x7.5 +36 18x7.5 +37 18x8.5 +30 18x8.5 +34 18x9 +30 18x9 +35 19x9 +30 |
| SLK55 AMG | 2005-2011 | 18x7.5 +37 18x7.5 +37 front / 18x8 +34 rear 18x7.5 +37 front / 18x8.5 +30 rear 18x7.5 +37 front / 18x8.5 +34 rear 19x8 +30 front / 19x9 +30 rear |
Wheel sizes Mercedes-Benz fitted to the 2005-2011 Mercedes-Benz SLK from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +37 |
| 16x7 +34 |
| 16x7 +37 |
| 16x7 +34 front / 16x8 +30 rear |
| 16x7 +37 front / 16x8 +30 rear |
| 16x8 +30 |
| 17x7.5 +36 |
| 17x7.5 +36 front / 17x8.5 +30 rear |
| 17x7.5 +37 front / 17x8.5 +34 rear |
| 17x8.5 +30 |
| 17x8.5 +34 |
| 18x7.5 +36 |
| 18x7.5 +36 front / 18x8.5 +30 rear |
| 18x7.5 +37 front / 18x8.5 +34 rear |
| 18x8.5 +30 |
| 18x8.5 +34 |
| 18x9 +30 |
| 18x9 +35 |
| 19x9 +30 |
Widths and offsets with Verified Fitment on the 2005-2011 Mercedes-Benz SLK: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 7" | +12 to +44 | +0 to +44 |
| 16-18" | 7.5" | +19 to +41 | +7 to +42 |
| 16-18" | 8" | +25 to +35 | +13 to +35 |
| 16-18" | 8.5" | — | +19 to +29 |
Wider still: 16x9.5 front — / rear +11 to +22; 17x9.5 front — / rear +11 to +22; 18x9.5 front — / rear +11 to +22 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 7" | +12 to +47 | +0 to +47 |
| 16-18" | 7.5" | +19 to +41 | +7 to +42 |
| 16-18" | 8" | +25 to +35 | +13 to +35 |
| 16-18" | 8.5" | — | +19 to +29 |
Wider still: 16x9.5 front — / rear +11 to +22; 17x9.5 front — / rear +11 to +22; 18x9.5 front — / rear +11 to +22 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | +19 to +41 | +7 to +42 |
| 17-19" | 8" | +25 to +35 | +13 to +35 |
| 17-19" | 8.5" | — | +19 to +29 |
Wider still: 17x9.5 front — / rear +11 to +22; 18x9.5 front — / rear +11 to +22; 19x9.5 front — / rear +11 to +22 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-19" | 7.5" | +19 to +41 | +7 to +42 |
| 18-19" | 8" | +25 to +35 | +13 to +35 |
| 18-19" | 8.5" | — | +19 to +29 |
Wider still: 18x9.5 front — / rear +11 to +22; 19x9.5 front — / rear +11 to +22 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2005-2011 Mercedes-Benz SLK. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)









The 2005-2011 Mercedes-Benz SLK (R171) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 15x7 +37; 16x7 +34; 16x7 +37; 16x7 +34 front / 16x8 +30 rear; 16x7 +37 front / 16x8 +30 rear; 16x8 +30; 17x7.5 +36; 17x7.5 +36 front / 17x8.5 +30 rear; 17x7.5 +37 front / 17x8.5 +34 rear; 17x8.5 +30; 17x8.5 +34; 18x7.5 +36; 18x7.5 +36 front / 18x8.5 +30 rear; 18x7.5 +37 front / 18x8.5 +34 rear; 18x8.5 +30; 18x8.5 +34; 18x9 +30; 18x9 +35; 19x9 +30.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.