Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz Sprinter built from 2019 to 2026 (1500 2.0T, 2.0TD, 2.0TD SuSi, eSprinter).
Every 2019-2026 Mercedes-Benz Sprinter uses a 6X130 bolt pattern with a 84.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 84.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz Sprinter (VS30) and the model years each was sold. All of them share the 6X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 1500 2.0T | 2019-2026 | 16x6.5 +62 |
| 2.0TD | 2019-2026 | 16x6.5 +62 |
| 2.0TD SuSi | 2019-2026 | 16x6.5 +54 front / 16x8.5 +63 rear |
| eSprinter | 2019-2026 | 16x6.5 +54 |
Wheel sizes Mercedes-Benz fitted to the 2019-2026 Mercedes-Benz Sprinter from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +54 |
| 16x6.5 +62 |
| 16x6.5 +54 front / 16x8.5 +63 rear |
Widths and offsets with Verified Fitment on the 2019-2026 Mercedes-Benz Sprinter: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +37 to +67 |
| 16-18" | 7" | +43 to +61 |
| 16-18" | 7.5" | +50 to +55 |
Wider still: 16x8 +35 to +54; 16x8.5 +42 to +48; 17x8 +35 to +54; 17x8.5 +42 to +48; 18x8 +35 to +54; 18x8.5 +42 to +48 fit with modifications (check load rating of replacement wheels, hub-centric rings (84.1 mm), check inner clearance to brakes and suspension, correct-length lug bolts for the wheel seat).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 6.5" | +37 to +64 | — |
| 16-18" | 7" | +43 to +61 | — |
| 16-18" | 7.5" | +50 to +55 | — |
| 16-18" | 8.5" | — | +62 to +63 |
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +37 to +64 |
| 16-18" | 7" | +43 to +61 |
| 16-18" | 7.5" | +50 to +55 |
Wider still: 16x8 +35 to +54; 16x8.5 +42 to +48; 17x8 +35 to +54; 17x8.5 +42 to +48; 18x8 +35 to +54; 18x8.5 +42 to +48 fit with modifications (check load rating of replacement wheels, hub-centric rings (84.1 mm), check inner clearance to brakes and suspension, correct-length lug bolts for the wheel seat).
The 2019-2026 Mercedes-Benz Sprinter (VS30) uses a 6X130 bolt pattern and a 84.1 mm center bore.
Factory sizes: 16x6.5 +54; 16x6.5 +62; 16x6.5 +54 front / 16x8.5 +63 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.