Nissan Murano (Z52) 2015-2024 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan Murano built from 2015 to 2024 (S, SV, SL, Platinum).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2015-2024
GenerationZ52

Every 2015-2024 Nissan Murano uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Murano (Z52) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
S2015-202418x7.5 +35
18x7.5 +50
SV2015-202418x7.5 +50
SL2015-202418x7.5 +35
18x7.5 +50
Platinum2015-202420x7.5 +50

Factory wheel sizes

Wheel sizes Nissan fitted to the 2015-2024 Nissan Murano from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +50
20x7.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2024 Nissan Murano: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S, SV

DiameterWidthOffset range
18-22"7.5"+33 to +55
18-22"8"+39 to +49

Wider still: 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

SL

DiameterWidthOffset range
18-22"7.5"+33 to +45
18-22"8"+39 to +49

Wider still: 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

Platinum

DiameterWidthOffset range
20-22"7.5"+33 to +55
20-22"8"+39 to +49

Wider still: 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2024 Nissan Murano. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

S, SV

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

SL

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

Platinum

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

FAQ

What is the bolt pattern of the 2015-2024 Nissan Murano?

The 2015-2024 Nissan Murano (Z52) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2015-2024 Nissan Murano from the factory?

Factory sizes: 18x7.5 +50; 20x7.5 +50.

What lug thread size does the 2015-2024 Nissan Murano use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2015-2024 Nissan Murano without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.