Nissan Xterra (N50) 2005-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan Xterra built from 2005 to 2015 (X, S, SE, Off-Road, PRO-4X).

Fitment specs

Bolt pattern6X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2005-2015
GenerationN50

Every 2005-2015 Nissan Xterra uses a 6X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Xterra (N50) and the model years each was sold. All of them share the 6X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
X2009-2015See factory sizes below
S2005-2015See factory sizes below
SE2005-2008See factory sizes below
Off-Road2005-200816x7 +30
PRO-4X2009-201516x7 +30

Factory wheel sizes

Wheel sizes Nissan fitted to the 2005-2015 Nissan Xterra from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +30
17x7.5 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2015 Nissan Xterra: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"7"+13 to +36
16-19"7.5"+19 to +29

Wider still: 16x8.5 +11 to +22; 17x8.5 +11 to +22; 18x8.5 +11 to +22; 19x8.5 +11 to +22 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).

FAQ

What is the bolt pattern of the 2005-2015 Nissan Xterra?

The 2005-2015 Nissan Xterra (N50) uses a 6X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2005-2015 Nissan Xterra from the factory?

Factory sizes: 16x7 +30; 17x7.5 +30.

What lug thread size does the 2005-2015 Nissan Xterra use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2005-2015 Nissan Xterra without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.