Porsche 911 Targa (991) 2017-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Porsche 911 Targa built from 2017 to 2019 (Carrera 4, Carrera 4S, Targa 4, Targa 4S).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Model years2017-2019
Generation991

Every 2017-2019 Porsche 911 Targa uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 911 Targa (991) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYears
Carrera 42017-2019
Carrera 4S2017-2019
Targa 42017-2019
Targa 4S2017-2019

Factory wheel sizes

Wheel sizes Porsche fitted to the 2017-2019 Porsche 911 Targa from the factory. Offsets are ET in millimeters.

Factory size
19x11 +56
19x11.5 +56
20x11 +56
20x11.5 +56
20x12 +50
20x12 +63

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2019 Porsche 911 Targa: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
19-21"11"+32 to +66
19-21"11.5"+39 to +72
19-21"12"+45 to +68
19-21"12.5"+52 to +62

Wider still: 19x13.5 +44 to +55; 20x13.5 +44 to +55; 21x13.5 +44 to +55 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

FAQ

What is the bolt pattern of the 2017-2019 Porsche 911 Targa?

The 2017-2019 Porsche 911 Targa (991) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2017-2019 Porsche 911 Targa from the factory?

Factory sizes: 19x11 +56; 19x11.5 +56; 20x11 +56; 20x11.5 +56; 20x12 +50; 20x12 +63.

What aftermarket wheel sizes fit the 2017-2019 Porsche 911 Targa without modifications?

Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.