Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Cayenne built from 2011 to 2018 (Base, S, S Hybrid, S E-Hybrid, Diesel, GTS, Turbo, Turbo S, Platinum Edition).
Every 2011-2018 Porsche Cayenne uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche Cayenne (958) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2011-2018 | 18x8 +53 |
| S | 2011-2018 | 18x8 +53 |
| S Hybrid | 2011-2014 | 18x8 +53 |
| S E-Hybrid | 2015-2018 | 18x8 +53 |
| Diesel | 2013-2016 | 18x8 +53 |
| GTS | 2013-2018 | See factory sizes below |
| Turbo | 2011-2018 | See factory sizes below |
| Turbo S | 2013-2018 | 21x10 +50 |
| Platinum Edition | 2016-2018 | 18x8 +53 |
Wheel sizes Porsche fitted to the 2011-2018 Porsche Cayenne from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +53 |
| 19x8.5 +59 |
| 20x8.5 +59 |
| 20x9 +57 |
| 20x9.5 +47 |
| 20x9.5 +55 |
| 21x10 +50 |
| 22x10.5 +45 |
| 22x11 +40 |
Widths and offsets with Verified Fitment on the 2011-2018 Porsche Cayenne: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 8" | +27 to +63 |
| 18-22" | 8.5" | +34 to +69 |
| 18-22" | 9" | +40 to +62 |
| 18-22" | 9.5" | +46 to +56 |
Wider still: 18x10.5 +38 to +49; 19x10.5 +38 to +49; 20x10.5 +38 to +49; 21x10.5 +38 to +49; 22x10.5 +38 to +49 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Offset range |
|---|---|---|
| 21-22" | 10" | +50 |
Wider still: 21x10.5 +38 to +49; 22x10.5 +38 to +49 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2018 Porsche Cayenne. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)


Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)
The 2011-2018 Porsche Cayenne (958) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 18x8 +53; 19x8.5 +59; 20x8.5 +59; 20x9 +57; 20x9.5 +47; 20x9.5 +55; 21x10 +50; 22x10.5 +45; 22x11 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.