Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Cayenne built from 2024 to 2026 (Base, S, E-Hybrid, S E-Hybrid, GTS, Turbo E-Hybrid, Turbo GT).
Every 2024-2026 Porsche Cayenne uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche Cayenne (9Y0/9Y3) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2024-2026 | See factory sizes below |
| S | 2024-2026 | 20x9 +50 front / 20x10.5 +64 rear |
| E-Hybrid | 2024-2026 | 20x9 +50 front / 20x10.5 +64 rear |
| S E-Hybrid | 2025-2026 | 20x9 +50 front / 20x10.5 +64 rear |
| GTS | 2025-2026 | 21x9.5 +46 front / 21x11 +58 rear |
| Turbo E-Hybrid | 2024-2026 | 21x9.5 +46 front / 21x11 +58 rear |
| Turbo GT | 2024-2025 | See factory sizes below |
Wheel sizes Porsche fitted to the 2024-2026 Porsche Cayenne from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x9 +50 front / 20x10.5 +64 rear |
| 21x9.5 +46 front / 21x11 +49 rear |
| 21x9.5 +46 front / 21x11 +58 rear |
| 22x10 +48 front / 22x11.5 +52 rear |
| 22x10 +48 front / 22x11.5 +61 rear |
Widths and offsets with Verified Fitment on the 2024-2026 Porsche Cayenne: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-24" | 9" | +19 to +60 | — |
| 20-24" | 9.5" | +25 to +61 | — |
| 20-24" | 10" | +32 to +54 | — |
| 20-24" | 10.5" | +38 to +48 | +22 to +70 |
| 20-24" | 11" | — | +28 to +64 |
| 20-24" | 11.5" | — | +35 to +57 |
| 20-24" | 12" | — | +41 to +51 |
Wider still: 20x13 front — / rear +33 to +44; 21x13 front — / rear +33 to +44; 22x13 front — / rear +33 to +44; 23x13 front — / rear +33 to +44; 24x13 front — / rear +33 to +44 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 21-24" | 9.5" | +25 to +56 | — |
| 21-24" | 10" | +32 to +54 | — |
| 21-24" | 10.5" | +38 to +48 | — |
| 21-24" | 11" | — | +28 to +64 |
| 21-24" | 11.5" | — | +35 to +57 |
| 21-24" | 12" | — | +41 to +51 |
Wider still: 21x13 front — / rear +33 to +44; 22x13 front — / rear +33 to +44; 23x13 front — / rear +33 to +44; 24x13 front — / rear +33 to +44 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).
The 2024-2026 Porsche Cayenne (9Y0/9Y3) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 20x9 +50 front / 20x10.5 +64 rear; 21x9.5 +46 front / 21x11 +49 rear; 21x9.5 +46 front / 21x11 +58 rear; 22x10 +48 front / 22x11.5 +52 rear; 22x10 +48 front / 22x11.5 +61 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 24" in diameter; see the size table for the offset range at each width.