Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Panamera built from 2010 to 2016 (Base, 4, S, 4S, S Hybrid, S E-Hybrid, GTS, Turbo, Turbo S).
Every 2010-2016 Porsche Panamera uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche Panamera (970) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2011-2016 | See factory sizes below |
| 4 | 2011-2016 | 18x8 +59 front / 18x9 +53 rear 18x9 +53 |
| S | 2010-2016 | 18x8 +59 front / 18x9 +53 rear 18x9 +53 |
| 4S | 2010-2016 | 18x8 +59 front / 18x9 +53 rear 18x9 +53 |
| S Hybrid | 2012-2013 | 18x8 +59 front / 18x9 +53 rear 18x9 +53 |
| S E-Hybrid | 2014-2016 | 18x8 +59 front / 18x9 +53 rear 18x9 +53 |
| GTS | 2013-2016 | 19x9 +60 front / 19x10 +61 rear 19x10 +61 |
| Turbo | 2010-2016 | 19x9 +60 front / 19x10 +61 rear 19x10 +61 |
| Turbo S | 2012-2016 | 19x9 +60 front / 19x10 +61 rear 19x10 +61 |
Wheel sizes Porsche fitted to the 2010-2016 Porsche Panamera from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +59 front / 18x9 +53 rear |
| 18x9 +53 |
| 19x9 +60 front / 19x10 +61 rear |
| 19x10 +61 |
| 20x9.5 +65 front / 20x10.5 +68 rear |
| 20x9.5 +65 front / 20x10.5 +65 rear |
| 20x9.5 +65 front / 20x11 +68 rear |
| 20x9.5 +65 front / 20x11.5 +63 rear |
| 20x10.5 +65 |
| 20x10.5 +68 |
| 20x11 +68 |
| 20x11.5 +63 |
| 21x9.5 +60 front / 21x11.5 +60 rear |
| 21x11.5 +60 |
| 22x9.5 +55 front / 22x11.5 +55 rear |
| 22x9.5 +55 front / 22x12 +50 rear |
| 22x10 +50 front / 22x12 +50 rear |
| 22x11.5 +55 |
| 22x12 +50 |
Widths and offsets with Verified Fitment on the 2010-2016 Porsche Panamera: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +23 to +69 | — |
| 18-21" | 8.5" | +30 to +75 | — |
| 18-20" | 9" | +36 to +75 | +31 to +63 |
| 21" | 9" | +36 to +75 | — |
| 18-20" | 9.5" | +42 to +70 | +37 to +69 |
| 21" | 9.5" | +42 to +70 | — |
| 18-20" | 10" | +49 to +64 | +44 to +66 |
| 21" | 10" | +49 to +64 | — |
| 18-20" | 10.5" | +55 to +58 | +50 to +60 |
| 21" | 10.5" | +55 to +58 | — |
Wider still: 18x11.5 front +47 to +51 / rear +42 to +53; 19x11.5 front +47 to +51 / rear +42 to +53; 20x11.5 front +47 to +51 / rear +42 to +53; 21x11.5 front +47 to +51 / rear — fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 9" | +36 to +70 | — |
| 19-21" | 9.5" | +42 to +70 | — |
| 19-20" | 10" | +49 to +64 | +44 to +66 |
| 21" | 10" | +49 to +64 | — |
| 19-20" | 10.5" | +55 to +58 | +50 to +60 |
| 21" | 10.5" | +55 to +58 | — |
Wider still: 19x11.5 front +47 to +51 / rear +42 to +53; 20x11.5 front +47 to +51 / rear +42 to +53; 21x11.5 front +47 to +51 / rear — fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2016 Porsche Panamera. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)
Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)
The 2010-2016 Porsche Panamera (970) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 18x8 +59 front / 18x9 +53 rear; 18x9 +53; 19x9 +60 front / 19x10 +61 rear; 19x10 +61; 20x9.5 +65 front / 20x10.5 +68 rear; 20x9.5 +65 front / 20x10.5 +65 rear; 20x9.5 +65 front / 20x11 +68 rear; 20x9.5 +65 front / 20x11.5 +63 rear; 20x10.5 +65; 20x10.5 +68; 20x11 +68; 20x11.5 +63; 21x9.5 +60 front / 21x11.5 +60 rear; 21x11.5 +60; 22x9.5 +55 front / 22x11.5 +55 rear; 22x9.5 +55 front / 22x12 +50 rear; 22x10 +50 front / 22x12 +50 rear; 22x11.5 +55; 22x12 +50.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.