Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Panamera built from 2024 to 2026 (Base, 4, 4 E-Hybrid, 4S E-Hybrid, GTS, Turbo E-Hybrid, Turbo S E-Hybrid).
Every 2024-2026 Porsche Panamera uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche Panamera (976) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2024-2026 | See factory sizes below |
| 4 | 2024-2026 | 19x9 +64 front / 19x10.5 +62 rear |
| 4 E-Hybrid | 2024-2026 | 19x9 +64 front / 19x10.5 +62 rear |
| 4S E-Hybrid | 2024-2026 | 20x9.5 +71 front / 20x10.5 +71 rear 20x9.5 +71 front / 20x11.5 +68 rear |
| GTS | 2025-2026 | 20x9.5 +71 front / 20x10.5 +71 rear 20x9.5 +71 front / 20x11.5 +68 rear |
| Turbo E-Hybrid | 2024-2026 | 20x9.5 +71 front / 20x10.5 +71 rear 20x9.5 +71 front / 20x11.5 +68 rear |
| Turbo S E-Hybrid | 2024-2026 | 21x9.5 +71 front / 21x10.5 +71 rear 21x9.5 +71 front / 21x11.5 +69 rear |
Wheel sizes Porsche fitted to the 2024-2026 Porsche Panamera from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9 +64 front / 19x10.5 +62 rear |
| 20x9.5 +71 front / 20x10.5 +71 rear |
| 20x9.5 +71 front / 20x11.5 +68 rear |
| 21x9.5 +71 front / 21x10.5 +71 rear |
| 21x9.5 +71 front / 21x11.5 +69 rear |
Widths and offsets with Verified Fitment on the 2024-2026 Porsche Panamera: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-22" | 9" | +47 to +74 | — |
| 19-22" | 9.5" | +53 to +75 | — |
| 19-22" | 10" | +60 to +70 | — |
| 19-22" | 10.5" | — | +38 to +72 |
| 19-22" | 11" | — | +44 to +75 |
| 19-22" | 11.5" | — | +51 to +74 |
| 19-22" | 12" | — | +57 to +68 |
Wider still: 19x13 front — / rear +49 to +61; 20x13 front — / rear +49 to +61; 21x13 front — / rear +49 to +61; 22x13 front — / rear +49 to +61 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-22" | 9.5" | +53 to +75 | — |
| 20-22" | 10" | +60 to +70 | — |
| 20-22" | 11.5" | — | +51 to +74 |
| 20-22" | 12" | — | +57 to +68 |
Wider still: 20x13 front — / rear +49 to +61; 21x13 front — / rear +49 to +61; 22x13 front — / rear +49 to +61 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 21-22" | 9.5" | +53 to +75 | — |
| 21-22" | 10" | +60 to +70 | — |
| 21-22" | 11.5" | — | +51 to +74 |
| 21-22" | 12" | — | +57 to +68 |
Wider still: 21x13 front — / rear +49 to +61; 22x13 front — / rear +49 to +61 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Porsche Panamera. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)
Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)
The 2024-2026 Porsche Panamera (976) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 19x9 +64 front / 19x10.5 +62 rear; 20x9.5 +71 front / 20x10.5 +71 rear; 20x9.5 +71 front / 20x11.5 +68 rear; 21x9.5 +71 front / 21x10.5 +71 rear; 21x9.5 +71 front / 21x11.5 +69 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.