Scion tC (ANT10) 2005-2010 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Scion tC built from 2005 to 2010 (Base, Spec).

Fitment specs

Bolt pattern5X100
Center bore54.1 mm
Lug threadM12x1.5
Model years2005-2010
GenerationANT10

Every 2005-2010 Scion tC uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Scion tC (ANT10) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYears
Base2005-2010
Spec2009-2010

Factory wheel sizes

Wheel sizes Scion fitted to the 2005-2010 Scion tC from the factory. Offsets are ET in millimeters.

Factory size
16x6.5 +45
17x7 +45
18x7.5 +42
19x8 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2010 Scion tC: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-19"7"+7 to +55
17-19"7.5"+13 to +60
17-19"8"+19 to +54
17-19"8.5"+26 to +47
17-19"9"+32 to +41

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2005-2010 Scion tC. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2005-2010 Scion tC?

The 2005-2010 Scion tC (ANT10) uses a 5X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 2005-2010 Scion tC from the factory?

Factory sizes: 16x6.5 +45; 17x7 +45; 18x7.5 +42; 19x8 +38.

What lug thread size does the 2005-2010 Scion tC use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2005-2010 Scion tC without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.