Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Tesla Model 3 built from 2017 to 2023 (Standard Range, Standard Range Plus, Rear-Wheel Drive, Mid Range, Long Range, Performance).
Every 2017-2023 Tesla Model 3 uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Tesla Model 3 (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Standard Range | 2019 | See factory sizes below |
| Standard Range Plus | 2019-2021 | 18x8.5 +40 |
| Rear-Wheel Drive | 2022-2023 | See factory sizes below |
| Mid Range | 2018-2019 | See factory sizes below |
| Long Range | 2017-2023 | 18x8.5 +35 18x8.5 +40 |
| Performance | 2018-2023 | 20x8.5 +35 20x8.5 +40 20x8.5 +35 front / 20x10 +40 rear 20x9 +34 20x9 +34 front / 20x10 +40 rear 20x10 +40 |
Wheel sizes Tesla fitted to the 2017-2023 Tesla Model 3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +35 |
| 18x8.5 +40 |
| 19x8.5 +35 |
| 19x8.5 +40 |
| 19x8.5 +35 front / 19x9.5 +35 rear |
| 19x8.5 +35 front / 19x10 +40 rear |
| 19x10 +40 |
| 20x8.5 +35 |
| 20x8.5 +40 |
| 20x8.5 +35 front / 20x10 +40 rear |
| 20x9 +34 |
| 20x9 +34 front / 20x10 +40 rear |
| 20x10 +40 |
Widths and offsets with Verified Fitment on the 2017-2023 Tesla Model 3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8.5" | +23 to +47 | +11 to +50 |
| 18-20" | 9" | +29 to +41 | +18 to +53 |
| 18-20" | 9.5" | +35 | +24 to +47 |
| 18-20" | 10" | — | +30 to +41 |
Wider still: 18x10.5 front — / rear +24 to +34; 19x10.5 front — / rear +24 to +34; 20x10.5 front — / rear +24 to +34 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8.5" | +28 to +44 | +16 to +45 |
| 18-20" | 9" | +34 to +38 | +23 to +50 |
| 18-20" | 9.5" | — | +29 to +44 |
| 18-20" | 10" | — | +35 to +38 |
Wider still: 18x10.5 front — / rear +29 to +31; 19x10.5 front — / rear +29 to +31; 20x10.5 front — / rear +29 to +31 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20" | 8.5" | +28 to +44 | +16 to +45 |
| 20" | 9" | +34 to +38 | +23 to +50 |
| 20" | 9.5" | — | +29 to +44 |
| 20" | 10" | — | +35 to +38 |
Wider still: 20x10.5 front — / rear +29 to +31 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2023 Tesla Model 3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)




















The 2017-2023 Tesla Model 3 (1st Gen) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 18x8.5 +35; 18x8.5 +40; 19x8.5 +35; 19x8.5 +40; 19x8.5 +35 front / 19x9.5 +35 rear; 19x8.5 +35 front / 19x10 +40 rear; 19x10 +40; 20x8.5 +35; 20x8.5 +40; 20x8.5 +35 front / 20x10 +40 rear; 20x9 +34; 20x9 +34 front / 20x10 +40 rear; 20x10 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.