Tesla Model 3 (Highland) 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Tesla Model 3 built from 2024 to 2026 (Standard, Rear-Wheel Drive, Long Range RWD, Long Range AWD, Performance).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM14x1.5
Model years2024-2026
GenerationHighland

Every 2024-2026 Tesla Model 3 uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Tesla Model 3 (Highland) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Standard202618x8.5 +38
Rear-Wheel Drive2024-2026See factory sizes below
Long Range RWD2025-2026See factory sizes below
Long Range AWD2024-202618x8.5 +38
Performance2024-202620x8.5 +35
20x8.5 +40
20x8.5 +35 front / 20x10 +45 rear
20x9 +34
20x9 +34 front / 20x10 +45 rear

Factory wheel sizes

Wheel sizes Tesla fitted to the 2024-2026 Tesla Model 3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8.5 +38
19x8.5 +38
19x8.5 +35 front / 19x9.5 +40 rear
19x8.5 +35 front / 19x10 +45 rear
20x8.5 +35
20x8.5 +40
20x8.5 +35 front / 20x10 +45 rear
20x9 +34
20x9 +34 front / 20x10 +45 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Tesla Model 3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Standard, Rear-Wheel Drive, Long Range RWD, Long Range AWD

DiameterWidthFront offsetRear offset
18-20"8.5"+24 to +40+19 to +48
18-20"9"+30 to +34+26 to +54
18-20"9.5"—+32 to +51
18-20"10"—+38 to +45

Wider still: 18x10.5 front — / rear +33 to +38; 19x10.5 front — / rear +33 to +38; 20x10.5 front — / rear +33 to +38 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Performance

DiameterWidthFront offsetRear offset
20"9"+30 to +34—
20"10"—+38 to +45

Wider still: 20x10.5 front — / rear +33 to +38 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Tesla Model 3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2024-2026 Tesla Model 3?

The 2024-2026 Tesla Model 3 (Highland) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2024-2026 Tesla Model 3 from the factory?

Factory sizes: 18x8.5 +38; 19x8.5 +38; 19x8.5 +35 front / 19x9.5 +40 rear; 19x8.5 +35 front / 19x10 +45 rear; 20x8.5 +35; 20x8.5 +40; 20x8.5 +35 front / 20x10 +45 rear; 20x9 +34; 20x9 +34 front / 20x10 +45 rear.

What lug thread size does the 2024-2026 Tesla Model 3 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Tesla Model 3 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.