Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Tesla Model Y built from 2020 to 2024 (Standard Range, Rear-Wheel Drive, Long Range, Performance).
Every 2020-2024 Tesla Model Y uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Tesla Model Y (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Standard Range | 2021 | 19x9.5 +45 20x9.5 +45 21x9.5 +40 front / 21x10.5 +48 rear |
| Rear-Wheel Drive | 2024 | See factory sizes below |
| Long Range | 2020-2024 | 19x9.5 +45 20x9.5 +45 21x9.5 +40 front / 21x10.5 +48 rear |
| Performance | 2020-2024 | 20x9.5 +45 21x9.5 +40 front / 21x10.5 +48 rear |
Wheel sizes Tesla fitted to the 2020-2024 Tesla Model Y from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9.5 +45 |
| 20x9.5 +45 |
| 21x9.5 +40 front / 21x10.5 +48 rear |
| 21x10.5 +48 |
Widths and offsets with Verified Fitment on the 2020-2024 Tesla Model Y: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-22" | 9.5" | +18 to +55 |
| 19-22" | 10" | +24 to +60 |
| 19-22" | 10.5" | +31 to +53 |
| 19-22" | 11" | +37 to +47 |
Wider still: 19x12 +29 to +40; 20x12 +29 to +40; 21x12 +29 to +40; 22x12 +29 to +40 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 9.5" | +18 to +55 |
| 20-22" | 10" | +24 to +60 |
| 20-22" | 10.5" | +31 to +53 |
| 20-22" | 11" | +37 to +47 |
Wider still: 20x12 +29 to +40; 21x12 +29 to +40; 22x12 +29 to +40 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2024 Tesla Model Y. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.





Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2020-2024 Tesla Model Y (1st Gen) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 19x9.5 +45; 20x9.5 +45; 21x9.5 +40 front / 21x10.5 +48 rear; 21x10.5 +48.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.