Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Tesla Model Y built from 2025 to 2026 (Standard, Long Range RWD, Long Range AWD, Performance).
Every 2025-2026 Tesla Model Y uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Tesla Model Y (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Standard | 2026 | See factory sizes below |
| Long Range RWD | 2025-2026 | See factory sizes below |
| Long Range AWD | 2025-2026 | See factory sizes below |
| Performance | 2026 | 21x9.5 +40 front / 21x10.5 +48 rear |
Wheel sizes Tesla fitted to the 2025-2026 Tesla Model Y from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +35 |
| 19x9.5 +45 |
| 19x9.5 +45 front / 19x10 +51 rear |
| 20x9.5 +45 |
| 20x9.5 +45 front / 21x10.5 +56 rear |
| 21x9.5 +40 front / 21x10.5 +48 rear |
| 21x9.5 +40 front / 21x10.5 +52 rear |
| 21x10.5 +48 |
Widths and offsets with Verified Fitment on the 2025-2026 Tesla Model Y: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 8.5" | +15 to +45 |
| 18-21" | 9" | +21 to +51 |
| 18-21" | 9.5" | +28 to +50 |
| 18-21" | 10" | +34 to +44 |
Wider still: 18x11 +26 to +37; 19x11 +26 to +37; 20x11 +26 to +37; 21x11 +26 to +37 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 21" | 9.5" | +28 to +50 | — |
| 21" | 10" | +34 to +44 | — |
| 21" | 10.5" | — | +41 to +48 |
Wider still: 21x11 front +26 to +37 / rear +26 to +41; 21x11.5 front — / rear +33 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Tesla Model Y. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
The 2025-2026 Tesla Model Y (1st Gen) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 18x8.5 +35; 19x9.5 +45; 19x9.5 +45 front / 19x10 +51 rear; 20x9.5 +45; 20x9.5 +45 front / 21x10.5 +56 rear; 21x9.5 +40 front / 21x10.5 +48 rear; 21x9.5 +40 front / 21x10.5 +52 rear; 21x10.5 +48.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.