Toyota Sienna (XL40) 2021-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota Sienna built from 2021 to 2026 (LE, Limited, Platinum AWD, Platinum FWD, XLE, XSE AWD, XSE FWD, Woodlands Edition, 25th Anniversary Edition AWD, 25th Anniversary Edition FWD, Woodland Edition).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM12x1.5
Model years2021-2026
GenerationXL40

Every 2021-2026 Toyota Sienna uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Sienna (XL40) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
LE2021-2026
Limited2021-2026
Platinum AWD2021-2026
Platinum FWD2021-2026
XLE2021-2026
XSE AWD2021-2026
XSE FWD2021-2026
Woodlands Edition2022-2024
25th Anniversary Edition AWD2023
25th Anniversary Edition FWD2023
Woodland Edition2025-2026

Factory wheel sizes

Wheel sizes Toyota fitted to the 2021-2026 Toyota Sienna from the factory. Offsets are ET in millimeters.

Factory size
17x7 +40
18x7.5 +40
20x7.5 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2021-2026 Toyota Sienna: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-21"7"+12 to +50
17-21"7.5"+18 to +48
17-21"8"+25 to +41
17-21"8.5"+31 to +35

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 Toyota Sienna. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2021-2026 Toyota Sienna?

The 2021-2026 Toyota Sienna (XL40) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2021-2026 Toyota Sienna from the factory?

Factory sizes: 17x7 +40; 18x7.5 +40; 20x7.5 +40.

What lug thread size does the 2021-2026 Toyota Sienna use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2021-2026 Toyota Sienna without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.