Toyota Tacoma 2nd Gen 2005-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Tacoma built from 2005 to 2015 (Base, PreRunner, X-Runner, TRD Pro).

Fitment specs

Bolt pattern6X139.7
Center bore106.1 mm
Lug threadM12x1.5
Model years2005-2015
Generation2nd Gen

Every 2005-2015 Toyota Tacoma uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Tacoma (2nd Gen) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2005-2015See factory sizes below
PreRunner2005-2015See factory sizes below
X-Runner2005-201418x7.5 +25
TRD Pro201516x7 +13
16x7 +25
16x7.5 +10

Factory wheel sizes

Wheel sizes Toyota fitted to the 2005-2015 Toyota Tacoma from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +30
17x7.5 +30
18x7.5 +25

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2015 Toyota Tacoma: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, PreRunner

DiameterWidthOffset range
16-18"7"-9 to +37
16-18"7.5"-2 to +30
16-18"8"+4 to +24
16-18"8.5"+11 to +17

Wider still: 16x9 -24 to +16; 16x9.5 -18 to +10; 16x10 -12 to +3; 17x9 -24 to +16; 17x9.5 -18 to +10; 17x10 -12 to +3… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

X-Runner

DiameterWidthOffset range
18"7.5"-2 to +30
18"8"+4 to +24
18"8.5"+11 to +17

Wider still: 18x9 -24 to +16; 18x9.5 -18 to +10; 18x10 -12 to +3; 19x9 -24 to +16; 19x9.5 -18 to +10; 19x10 -12 to +3… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

TRD Pro

DiameterWidthOffset range
16-18"7"-9 to +35
16-18"7.5"-2 to +30
16-18"8"+4 to +24
16-18"8.5"+11 to +17

Wider still: 16x9 -24 to +16; 16x9.5 -18 to +10; 16x10 -12 to +3; 17x9 -24 to +16; 17x9.5 -18 to +10; 17x10 -12 to +3… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

FAQ

What is the bolt pattern of the 2005-2015 Toyota Tacoma?

The 2005-2015 Toyota Tacoma (2nd Gen) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.

What size wheels came on the 2005-2015 Toyota Tacoma from the factory?

Factory sizes: 16x7 +30; 17x7.5 +30; 18x7.5 +25.

What lug thread size does the 2005-2015 Toyota Tacoma use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2005-2015 Toyota Tacoma without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.