Toyota Tacoma (N400) 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Tacoma built from 2024 to 2026 (SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, Trailhunter, TRD Pro).

Fitment specs

Bolt pattern6X139.7
Center bore95.1 mm
Lug threadM14x1.5
Model years2024-2026
GenerationN400

Every 2024-2026 Toyota Tacoma uses a 6X139.7 bolt pattern with a 95.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 95.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Tacoma (N400) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
SR2024-202617x7 +60
17x7.5 +55
SR52024-202617x7 +60
17x7.5 +55
TRD PreRunner2024-202617x7.5 +55
TRD Sport2024-202618x7.5 +55
18x8 +45
TRD Off-Road2024-202617x7.5 +55
Limited2024-202618x7.5 +55
18x8 +45
Trailhunter2024-202618x9 +15
TRD Pro2024-202618x9 +15

Factory wheel sizes

Wheel sizes Toyota fitted to the 2024-2026 Toyota Tacoma from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +60
17x7.5 +55
18x7.5 +55
18x8 +45
18x9 +15

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Toyota Tacoma: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SR, SR5

DiameterWidthOffset range
17-19"7"+31 to +67
17-19"7.5"+38 to +60
17-19"8"+44 to +54

Wider still: 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

TRD PreRunner, TRD Off-Road

DiameterWidthOffset range
17-19"7.5"+38 to +60
17-19"8"+44 to +54

Wider still: 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

TRD Sport, Limited

DiameterWidthOffset range
18-19"7.5"+38 to +60
18-19"8"+44 to +54

Wider still: 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Trailhunter, TRD Pro

DiameterWidthOffset range
18-19"9"+15 to +25

Wider still: 18x9.5 +22 to +41; 19x9.5 +22 to +41 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

FAQ

What is the bolt pattern of the 2024-2026 Toyota Tacoma?

The 2024-2026 Toyota Tacoma (N400) uses a 6X139.7 bolt pattern and a 95.1 mm center bore.

What size wheels came on the 2024-2026 Toyota Tacoma from the factory?

Factory sizes: 17x7 +60; 17x7.5 +55; 18x7.5 +55; 18x8 +45; 18x9 +15.

What lug thread size does the 2024-2026 Toyota Tacoma use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Toyota Tacoma without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.