Toyota Venza (XU80) 2021-2024 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Venza built from 2021 to 2024 (LE, XLE, Nightshade, Limited).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM12x1.5
Model years2021-2024
GenerationXU80

Every 2021-2024 Toyota Venza uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Venza (XU80) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
LE2021-202418x7 +35
XLE2021-202419x7 +35
Nightshade2022-2024See factory sizes below
Limited2021-202419x7 +35

Factory wheel sizes

Wheel sizes Toyota fitted to the 2021-2024 Toyota Venza from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7 +35
19x7 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2021-2024 Toyota Venza: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LE, Nightshade

DiameterWidthOffset range
18-21"7"+18 to +41
18-21"7.5"+24 to +34

Wider still: 18x8.5 +16 to +27; 19x8.5 +16 to +27; 20x8.5 +16 to +27; 21x8.5 +16 to +27 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

XLE, Limited

DiameterWidthOffset range
19-21"7"+18 to +41
19-21"7.5"+24 to +34

Wider still: 19x8.5 +16 to +27; 20x8.5 +16 to +27; 21x8.5 +16 to +27 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2021-2024 Toyota Venza?

The 2021-2024 Toyota Venza (XU80) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2021-2024 Toyota Venza from the factory?

Factory sizes: 18x7 +35; 19x7 +35.

What lug thread size does the 2021-2024 Toyota Venza use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2021-2024 Toyota Venza without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.