Volkswagen Golf GTI (Mk6) 2010-2014 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Volkswagen Golf GTI built from 2010 to 2014 (Base, Driver's Edition, Wolfsburg Edition, Autobahn).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years2010-2014
GenerationMk6

Every 2010-2014 Volkswagen Golf GTI uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Volkswagen Golf GTI (Mk6) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
Base2010-2014
Driver's Edition2013
Wolfsburg Edition2013-2014
Autobahn2012-2014

Factory wheel sizes

Wheel sizes Volkswagen fitted to the 2010-2014 Volkswagen Golf GTI from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +49
18x7.5 +51
19x7.5 +51
19x8 +50
20x8 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2010-2014 Volkswagen Golf GTI: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"7.5"+32 to +54
16-19"8"+38 to +48

Wider still: 16x9 +30 to +41; 17x9 +30 to +41; 18x9 +30 to +41; 19x9 +30 to +41 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts (longer with spacers)).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2014 Volkswagen Golf GTI. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, front camber bolts (strut-to-knuckle) for negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts (longer with spacers))

FAQ

What is the bolt pattern of the 2010-2014 Volkswagen Golf GTI?

The 2010-2014 Volkswagen Golf GTI (Mk6) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 2010-2014 Volkswagen Golf GTI from the factory?

Factory sizes: 17x7.5 +49; 18x7.5 +51; 19x7.5 +51; 19x8 +50; 20x8 +47.

What lug thread size does the 2010-2014 Volkswagen Golf GTI use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2010-2014 Volkswagen Golf GTI without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.