Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Volkswagen Golf GTI built from 1985 to 1992 (Base, 16V).
Every 1985-1992 Volkswagen Golf GTI uses a 4X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Volkswagen Golf GTI (Mk2) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1985-1992 |
| 16V | 1987-1992 |
Wheel sizes Volkswagen fitted to the 1985-1992 Volkswagen Golf GTI from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 13x5 +45 |
| 13x5.5 +38 |
| 14x5.5 +38 |
| 14x6 +38 |
| 15x6 +38 |
| 16x6.5 +38 |
| 16x7 +35 |
Widths and offsets with Verified Fitment on the 1985-1992 Volkswagen Golf GTI: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-16" | 6" | +21 to +44 |
| 14-16" | 6.5" | +27 to +37 |
Wider still: 14x7.5 +19 to +30; 15x7.5 +19 to +30; 16x7.5 +19 to +30 fit with modifications (roll front and rear fender lips, correct-length m12x1.5 ball-seat lug bolts for the new wheel, hub-centric rings (57.1 mm) for wheels with a larger bore).
The 1985-1992 Volkswagen Golf GTI (Mk2) uses a 4X100 bolt pattern and a 57.1 mm center bore.
Factory sizes: 13x5 +45; 13x5.5 +38; 14x5.5 +38; 14x6 +38; 15x6 +38; 16x6.5 +38; 16x7 +35.
Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.