Volkswagen Jetta (Mk2) 1984-1992 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Volkswagen Jetta built from 1984 to 1992 (Base, GL, Carat, GLI).

Fitment specs

Bolt pattern4X100
Center bore57.1 mm
Lug threadM12x1.5
Model years1984-1992
GenerationMk2

Every 1984-1992 Volkswagen Jetta uses a 4X100 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Volkswagen Jetta (Mk2) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1984-1992See factory sizes below
GL1985-199214x6 +38
Carat1987-199014x6 +38
GLI1984-199214x6 +38
15x6.5 +38

Factory wheel sizes

Wheel sizes Volkswagen fitted to the 1984-1992 Volkswagen Jetta from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
13x5.5 +42
14x6 +38
15x6 +38
15x6.5 +38
16x7 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1984-1992 Volkswagen Jetta: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthOffset range
13-16"6"+21 to +44
13-16"6.5"+27 to +37

Wider still: 13x7.5 +19 to +30; 14x7.5 +19 to +30; 15x7.5 +19 to +30; 16x7.5 +19 to +30 fit with modifications (roll front and rear fender lips, correct-length m12x1.5 ball-seat lug bolts for the new wheel, hub-centric rings (57.1 mm) for wheels with a larger bore).

GL, Carat, GLI

DiameterWidthOffset range
14-16"6"+21 to +44
14-16"6.5"+27 to +37

Wider still: 14x7.5 +19 to +30; 15x7.5 +19 to +30; 16x7.5 +19 to +30 fit with modifications (roll front and rear fender lips, correct-length m12x1.5 ball-seat lug bolts for the new wheel, hub-centric rings (57.1 mm) for wheels with a larger bore).

FAQ

What is the bolt pattern of the 1984-1992 Volkswagen Jetta?

The 1984-1992 Volkswagen Jetta (Mk2) uses a 4X100 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 1984-1992 Volkswagen Jetta from the factory?

Factory sizes: 13x5.5 +42; 14x6 +38; 15x6 +38; 15x6.5 +38; 16x7 +35.

What lug thread size does the 1984-1992 Volkswagen Jetta use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1984-1992 Volkswagen Jetta without modifications?

Bolt-on sizes run from 13" to 16" in diameter; see the size table for the offset range at each width.