Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura NSX built from 1991 to 1993.
Every 1991-1993 Acura NSX uses a 5X114.3 bolt pattern with a 70.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura NSX (NA1) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Coupe | 1991-1993 |
Wheel sizes Acura fitted to the 1991-1993 Acura NSX from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6.5 +55 front / 16x8 +60 rear |
| 16x7 +55 front / 16x8 +55 rear |
| 16x7 +55 front / 17x8.5 +60 rear |
| 17x7 +55 front / 17x9 +55 rear |
Widths and offsets with Verified Fitment on the 1991-1993 Acura NSX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 15-18" | 6.5" | +38 to +60 | — |
| 15-18" | 7" | +44 to +54 | — |
| 15-18" | 8" | — | +43 to +65 |
| 15-18" | 8.5" | — | +49 to +59 |
Wider still: 15x9.5 front — / rear +41 to +52; 16x9.5 front — / rear +41 to +52; 17x9.5 front — / rear +41 to +52; 18x9.5 front — / rear +41 to +52 fit with modifications (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1991-1993 Acura NSX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels)
The 1991-1993 Acura NSX (NA1) uses a 5X114.3 bolt pattern and a 70.1 mm center bore.
Factory sizes: 15x6.5 +55 front / 16x8 +60 rear; 16x7 +55 front / 16x8 +55 rear; 16x7 +55 front / 17x8.5 +60 rear; 17x7 +55 front / 17x9 +55 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.