Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura NSX built from 2022 to 2022.
Every 2022 Acura NSX uses a 5X120 bolt pattern with a 70.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura NSX (NC1) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| Type S | 2022 |
Wheel sizes Acura fitted to the 2022 Acura NSX from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8.5 +55 front / 20x11 +55 rear |
Widths and offsets with Verified Fitment on the 2022 Acura NSX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-21" | 8.5" | +38 to +60 | — |
| 19-21" | 9" | +44 to +54 | — |
| 19-21" | 11" | — | +38 to +60 |
| 19-21" | 11.5" | — | +44 to +54 |
Wider still: 19x12.5 front — / rear +36 to +47; 20x12.5 front — / rear +36 to +47; 21x12.5 front — / rear +36 to +47 fit with modifications (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels).
The 2022 Acura NSX (NC1) uses a 5X120 bolt pattern and a 70.1 mm center bore.
Factory sizes: 19x8.5 +55 front / 20x11 +55 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.