Audi A6 (C4) 1995-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi A6 built from 1995 to 1997 (2.8, Avant).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years1995-1997
GenerationC4

Every 1995-1997 Audi A6 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi A6 (C4) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
2.81995-199716x6.5 +45
16x7 +45
17x7 +43
17x7.5 +43
18x8 +38
Avant1995-199715x6 +45

Factory wheel sizes

Wheel sizes Audi fitted to the 1995-1997 Audi A6 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +45
15x6.5 +45
16x6.5 +45
16x7 +45
17x7 +43
17x7.5 +43
18x8 +38

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1995-1997 Audi A6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

2.8

DiameterWidthOffset range
16-19"6.5"+34 to +45

Wider still: 16x7.5 +26 to +37; 17x7.5 +26 to +37; 18x7.5 +26 to +37; 19x7.5 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).

Avant

DiameterWidthOffset range
15-19"6"+28 to +51
15-19"6.5"+34 to +44

Wider still: 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37; 18x7.5 +26 to +37; 19x7.5 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1995-1997 Audi A6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

2.8

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)

Avant

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 1995-1997 Audi A6?

The 1995-1997 Audi A6 (C4) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 1995-1997 Audi A6 from the factory?

Factory sizes: 15x6 +45; 15x6.5 +45; 16x6.5 +45; 16x7 +45; 17x7 +43; 17x7.5 +43; 18x8 +38.

What lug thread size does the 1995-1997 Audi A6 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1995-1997 Audi A6 without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.