Audi A6 (C5) 1998-2004 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi A6 built from 1998 to 2004 (2.8L FWD, 2.8L Quattro, Avant FWD, Avant Quattro, 2.7T, 4.2, 3.0L FWD, 3.0L Quattro).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years1998-2004
GenerationC5

Every 1998-2004 Audi A6 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi A6 (C5) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
2.8L FWD1998-2001
2.8L Quattro1998-2001
Avant FWD1998-2000
Avant Quattro1998-2004
2.7T2000-2004
4.22000-2004
3.0L FWD2002-2004
3.0L Quattro2002-2004

Factory wheel sizes

Wheel sizes Audi fitted to the 1998-2004 Audi A6 from the factory. Offsets are ET in millimeters.

Factory size
15x6 +45
15x7 +45
16x7 +32
16x7 +45
17x7.5 +43
17x7.5 +45
17x8 +35
18x8 +35
18x8 +43
18x8.5 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1998-2004 Audi A6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"+15 to +55
15-17"6.5"+22 to +57
15-17"7"+28 to +50
15-17"7.5"+34 to +44

Wider still: 15x8.5 +26 to +37; 16x8.5 +26 to +37; 17x8.5 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1998-2004 Audi A6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

FAQ

What is the bolt pattern of the 1998-2004 Audi A6?

The 1998-2004 Audi A6 (C5) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 1998-2004 Audi A6 from the factory?

Factory sizes: 15x6 +45; 15x7 +45; 16x7 +32; 16x7 +45; 17x7.5 +43; 17x7.5 +45; 17x8 +35; 18x8 +35; 18x8 +43; 18x8.5 +30.

What lug thread size does the 1998-2004 Audi A6 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1998-2004 Audi A6 without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.