Audi A6 (C7) 2012-2018 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi A6 built from 2012 to 2018 (Premium, Premium Plus, Prestige, TDI, Competition).

Fitment specs

Bolt pattern5X112
Center bore66.5 mm
Lug threadM14x1.5
Model years2012-2018
GenerationC7

Every 2012-2018 Audi A6 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi A6 (C7) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Premium2012-2018See factory sizes below
Premium Plus2012-201819x8.5 +45
Prestige2012-201819x8.5 +45
TDI2014-2018See factory sizes below
Competition2016-2018See factory sizes below

Factory wheel sizes

Wheel sizes Audi fitted to the 2012-2018 Audi A6 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +39
19x8 +42
19x8.5 +45
20x8.5 +45
21x9 +39

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2012-2018 Audi A6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Premium, TDI, Competition

DiameterWidthOffset range
18-21"8"+20 to +49
18-21"8.5"+26 to +50
18-21"9"+33 to +44

Wider still: 18x10 +26 to +37; 19x10 +26 to +37; 20x10 +26 to +37; 21x10 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).

Premium Plus, Prestige

DiameterWidthOffset range
19-21"8.5"+26 to +50
19-21"9"+33 to +44

Wider still: 19x10 +26 to +37; 20x10 +26 to +37; 21x10 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2018 Audi A6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Premium, TDI, Competition

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts)

Premium Plus, Prestige

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.5 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2012-2018 Audi A6?

The 2012-2018 Audi A6 (C7) uses a 5X112 bolt pattern and a 66.5 mm center bore.

What size wheels came on the 2012-2018 Audi A6 from the factory?

Factory sizes: 18x8 +39; 19x8 +42; 19x8.5 +45; 20x8.5 +45; 21x9 +39.

What lug thread size does the 2012-2018 Audi A6 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2012-2018 Audi A6 without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.