BMW 3 Series (E36) 1992-1999 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 3 Series built from 1992 to 1999 (318i, 318is, 318ti, 323i, 323is, 325i, 325is, 328i, 328is).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM12x1.5
Model years1992-1999
GenerationE36

Every 1992-1999 BMW 3 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 3 Series (E36) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
318i1992-199815x6 +42
15x6.5 +47
15x7 +47
16x7 +46
318is1992-199715x6.5 +47
15x7 +47
16x7 +46
318ti1995-199915x6 +42
15x6.5 +47
15x7 +47
16x7 +46
323i1998-199915x6.5 +47
15x7 +47
16x7 +46
323is1998-199915x6.5 +47
15x7 +47
16x7 +46
325i1992-199515x6 +42
15x6.5 +47
15x7 +47
16x7 +46
325is1992-199515x6.5 +47
15x7 +47
16x7 +46
328i1996-199915x6.5 +47
15x7 +47
16x7 +46
328is1996-199915x6.5 +47
15x7 +47
16x7 +46

Factory wheel sizes

Wheel sizes BMW fitted to the 1992-1999 BMW 3 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +42
15x6.5 +47
15x7 +47
16x7 +46
17x7 +41
17x7.5 +41
17x7.5 +41 front / 17x8.5 +41 rear
17x8.5 +41

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1992-1999 BMW 3 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

318i, 318ti, 325i

DiameterWidthFront offsetRear offset
15-17"6"+5 to +52+17 to +52
18"6"+5 to +52—
15-17"6.5"+11 to +58+24 to +58
18"6.5"+11 to +58—
15-17"7"+17 to +53+30 to +52
18"7"+17 to +53—
15-17"7.5"+24 to +46+36 to +46
18"7.5"+24 to +46—
15-18"8"+30 to +40—

Wider still: 15x9 front +22 to +33 / rear —; 16x9 front +22 to +33 / rear —; 17x9 front +22 to +33 / rear —; 18x9 front +22 to +33 / rear — fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

318is, 323i, 325is, 328i

DiameterWidthFront offsetRear offset
15-17"6.5"+11 to +57+24 to +57
18"6.5"+11 to +57—
15-17"7"+17 to +53+30 to +52
18"7"+17 to +53—
15-17"7.5"+24 to +46+36 to +46
18"7.5"+24 to +46—
15-18"8"+30 to +40—

Wider still: 15x9 front +22 to +33 / rear —; 16x9 front +22 to +33 / rear —; 17x9 front +22 to +33 / rear —; 18x9 front +22 to +33 / rear — fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

323is, 328is

DiameterWidthFront offsetRear offset
15-17"7"+17 to +53+30 to +52
18"7"+17 to +53—
15-17"7.5"+24 to +46+36 to +46
18"7.5"+24 to +46—
15-18"8"+30 to +40—

Wider still: 15x9 front +22 to +33 / rear —; 16x9 front +22 to +33 / rear —; 17x9 front +22 to +33 / rear —; 18x9 front +22 to +33 / rear — fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1992-1999 BMW 3 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

318i, 318ti, 325i

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

318is, 323i, 325is, 328i

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

323is, 328is

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 1992-1999 BMW 3 Series?

The 1992-1999 BMW 3 Series (E36) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 1992-1999 BMW 3 Series from the factory?

Factory sizes: 15x6 +42; 15x6.5 +47; 15x7 +47; 16x7 +46; 17x7 +41; 17x7.5 +41; 17x7.5 +41 front / 17x8.5 +41 rear; 17x8.5 +41.

What lug thread size does the 1992-1999 BMW 3 Series use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1992-1999 BMW 3 Series without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.