Chevrolet Corvette (C6) 2005-2013 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Corvette built from 2005 to 2013 (Base, Grand Sport, 427, Z06, ZR1).

Fitment specs

Bolt pattern5X120.65 / 5X120
Center bore70.3 mm
Lug threadM12x1.5
Model years2005-2013
GenerationC6

Every 2005-2013 Chevrolet Corvette uses a 5X120.65 / 5X120 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Corvette (C6) and the model years each was sold. All of them share the 5X120.65 / 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2005-2013See factory sizes below
Grand Sport2010-2013See factory sizes below
4272013See factory sizes below
Z062006-201318x9.5 +40 front / 19x12 +59 rear
ZR12009-201320x9 +40 front / 20x11 +50 rear
20x12 +59

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2005-2013 Chevrolet Corvette from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8.5 +56 front / 19x10 +79 rear
18x9.5 +40 front / 19x12 +59 rear
19x8 +54 front / 19x10 +59 rear
19x10 +40 front / 20x12 +59 rear
19x12 +59
20x9 +40 front / 20x11 +50 rear
20x12 +59

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2013 Chevrolet Corvette: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Grand Sport, 427

DiameterWidthFront offsetRear offset
18-20"8.5"+19 to +61—
18-20"9"+25 to +55—
18-20"9.5"+32 to +49—
18-20"10"+38 to +42+39 to +75
18-20"10.5"—+45 to +75
18-20"11"—+52 to +72
18-20"11.5"—+58 to +65

Z06

DiameterWidthFront offsetRear offset
18-20"9.5"+32 to +49—
18-20"10"+38 to +42—
19-20"12"—+59

ZR1

DiameterWidthFront offsetRear offset
20"9"+25 to +50—
20"9.5"+32 to +49—
20"10"+38 to +42—
20"11"—+50 to +60
20"11.5"—+57 to +65

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2005-2013 Chevrolet Corvette. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Grand Sport, 427

Modifications Required (roll front and rear fender lips, camber adjustment (shims / eccentric bolts) for wider rears, extended wheel studs if spacers are used)

Z06

Modifications Required (roll front and rear fender lips, camber adjustment (shims / eccentric bolts) for wider rears, extended wheel studs if spacers are used)

ZR1

Modifications Required (roll front and rear fender lips, camber adjustment (shims / eccentric bolts) for wider rears, extended wheel studs if spacers are used)

FAQ

What is the bolt pattern of the 2005-2013 Chevrolet Corvette?

The 2005-2013 Chevrolet Corvette (C6) uses a 5X120.65 / 5X120 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 2005-2013 Chevrolet Corvette from the factory?

Factory sizes: 18x8.5 +56 front / 19x10 +79 rear; 18x9.5 +40 front / 19x12 +59 rear; 19x8 +54 front / 19x10 +59 rear; 19x10 +40 front / 20x12 +59 rear; 19x12 +59; 20x9 +40 front / 20x11 +50 rear; 20x12 +59.

What lug thread size does the 2005-2013 Chevrolet Corvette use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2005-2013 Chevrolet Corvette without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.