Dodge Charger (LD) 2011-2022 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Charger built from 2011 to 2022 (SE, SXT, GT, R/T, Scat Pack, SRT8, SRT 392, SRT Hellcat, SRT Hellcat Redeye).

Fitment specs

Bolt pattern5X115
Center bore71.5 mm
Lug threadM14x1.5
Model years2011-2022
GenerationLD

Every 2011-2022 Dodge Charger uses a 5X115 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Dodge Charger (LD) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
SE2011-2017See factory sizes below
SXT2011-2022See factory sizes below
GT2017-202220x8 +24
20x8 +50
20x9 +22
20x9 +22.5
R/T2011-202220x8 +24
Scat Pack2015-202220x8 +24
20x8 +50
20x9 +22
20x9 +22.5
20x9.5 +18.5
SRT82012-201420x8 +24
SRT 3922015-201820x9.5 +18.5
SRT Hellcat2015-202220x9.5 +18.5
SRT Hellcat Redeye2021-2022See factory sizes below

Factory wheel sizes

Wheel sizes Dodge fitted to the 2011-2022 Dodge Charger from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +22
17x7 +24
17x7.5 +24
18x7.5 +24
19x7.5 +24
19x7.5 +55
19x8 +50
20x7.5 +55
20x8 +24
20x8 +50
20x8.5 +47
20x8.5 +50
20x9 +22.5
20x9 +45
20x9.5 +18.5
20x11 -2.5
21x8 +24
21x8.5 +24
21x9 +20
22x9 +20

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2022 Dodge Charger: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SE, SXT, SRT Hellcat Redeye

DiameterWidthOffset range
17-21"7"-6 to +32
17-21"7.5"+1 to +38
17-21"8"+7 to +45
17-21"8.5"+13 to +48
17-21"9"+20 to +41

Wider still: 17x9.5 +5 to +41; 17x10 +12 to +35; 18x9.5 +5 to +41; 18x10 +12 to +35; 19x9.5 +5 to +41; 19x10 +12 to +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

GT, R/T, Scat Pack, SRT8

DiameterWidthOffset range
20-21"8"+7 to +34
20-21"8.5"+13 to +40
20-21"9"+20 to +41

Wider still: 20x9.5 +5 to +41; 20x10 +12 to +35; 21x9.5 +5 to +41; 21x10 +12 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

SRT 392, SRT Hellcat

DiameterWidthOffset range
20-21"9.5"+19 to +28

Wider still: 20x10 +12 to +35; 21x10 +12 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2022 Dodge Charger. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

SE, SXT, SRT Hellcat Redeye

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

GT, R/T, Scat Pack, SRT8

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

SRT 392, SRT Hellcat

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2011-2022 Dodge Charger?

The 2011-2022 Dodge Charger (LD) uses a 5X115 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 2011-2022 Dodge Charger from the factory?

Factory sizes: 17x7 +22; 17x7 +24; 17x7.5 +24; 18x7.5 +24; 19x7.5 +24; 19x7.5 +55; 19x8 +50; 20x7.5 +55; 20x8 +24; 20x8 +50; 20x8.5 +47; 20x8.5 +50; 20x9 +22.5; 20x9 +45; 20x9.5 +18.5; 20x11 -2.5; 21x8 +24; 21x8.5 +24; 21x9 +20; 22x9 +20.

What lug thread size does the 2011-2022 Dodge Charger use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2011-2022 Dodge Charger without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.