Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Dodge Charger built from 2024 to 2026 (Daytona R/T, Daytona Scat Pack).
Every 2024-2026 Dodge Charger uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Dodge Charger (LB) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Daytona R/T | 2024-2026 | 18x8.5 +48 |
| Daytona Scat Pack | 2024-2026 | 20x11 +61 front / 20x11.5 +70 rear |
Wheel sizes Dodge fitted to the 2024-2026 Dodge Charger from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +48 |
| 20x9 +42 |
| 20x10 +46 |
| 20x11 +61 front / 20x11.5 +70 rear |
Widths and offsets with Verified Fitment on the 2024-2026 Dodge Charger: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-19" | 8.5" | +31 to +53 |
| 18-19" | 9" | +37 to +47 |
Wider still: 18x10 +29 to +40; 19x10 +29 to +40 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20" | 11" | +61 | — |
| 20" | 11.5" | — | +69 to +70 |
The 2024-2026 Dodge Charger (LB) uses a 5X127 bolt pattern and a 71.5 mm center bore.
Factory sizes: 18x8.5 +48; 20x9 +42; 20x10 +46; 20x11 +61 front / 20x11.5 +70 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.