Ford Expedition (UN93) 1997-2002 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford Expedition built from 1997 to 2002 (XLT, Eddie Bauer).

Fitment specs

Bolt pattern5X135
Center bore87.1 mm
Lug threadM14x2.0
Model years1997-2002
GenerationUN93

Every 1997-2002 Ford Expedition uses a 5X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x2.0. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Expedition (UN93) and the model years each was sold. All of them share the 5X135 bolt pattern.

SubmodelYears
XLT1997-2002
Eddie Bauer1997-2002

Factory wheel sizes

Wheel sizes Ford fitted to the 1997-2002 Ford Expedition from the factory. Offsets are ET in millimeters.

Factory size
16x7 +14
17x7.5 +14

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1997-2002 Ford Expedition: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-22"7"-3 to +20
16-22"7.5"+3 to +13

Wider still: 16x8.5 -5 to +6; 17x8.5 -5 to +6; 18x8.5 -5 to +6; 19x8.5 -5 to +6; 20x8.5 -5 to +6; 21x8.5 -5 to +6… fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).

FAQ

What is the bolt pattern of the 1997-2002 Ford Expedition?

The 1997-2002 Ford Expedition (UN93) uses a 5X135 bolt pattern and a 87.1 mm center bore.

What size wheels came on the 1997-2002 Ford Expedition from the factory?

Factory sizes: 16x7 +14; 17x7.5 +14.

What lug thread size does the 1997-2002 Ford Expedition use?

Its wheel fasteners use a M14x2.0 thread.

What aftermarket wheel sizes fit the 1997-2002 Ford Expedition without modifications?

Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.