Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Expedition built from 2026 to 2026 (XL, XLT, Active, Tremor, King Ranch, Platinum, MAX).
Every 2026 Ford Expedition uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Expedition and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| XL | 2026 | See factory sizes below |
| XLT | 2026 | 18x8.5 +44 |
| Active | 2026 | 18x8.5 +44 |
| Tremor | 2026 | 18x8.5 +44 |
| King Ranch | 2026 | 22x9 +44 |
| Platinum | 2026 | 20x8.5 +44 |
| MAX | 2026 | See factory sizes below |
Wheel sizes Ford fitted to the 2026 Ford Expedition from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8.5 +44 |
| 20x8.5 +44 |
| 22x9 +44 |
| 24x9.5 +40 |
Widths and offsets with Verified Fitment on the 2026 Ford Expedition: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-24" | 8.5" | +27 to +49 |
| 18-24" | 9" | +33 to +43 |
Wider still: 18x10 +25 to +36; 19x10 +25 to +36; 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36; 23x10 +25 to +36… fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).
| Diameter | Width | Offset range |
|---|---|---|
| 22-24" | 9" | +33 to +44 |
Wider still: 22x10 +25 to +36; 23x10 +25 to +36; 24x10 +25 to +36 fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).
| Diameter | Width | Offset range |
|---|---|---|
| 20-24" | 8.5" | +27 to +49 |
| 20-24" | 9" | +33 to +43 |
Wider still: 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36; 23x10 +25 to +36; 24x10 +25 to +36 fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).
The 2026 Ford Expedition uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 18x8.5 +44; 20x8.5 +44; 22x9 +44; 24x9.5 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 24" in diameter; see the size table for the offset range at each width.