Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Expedition built from 2007 to 2017 (XLT, Eddie Bauer, Limited, King Ranch, Platinum, EL).
Every 2007-2017 Ford Expedition uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x2.0. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Expedition (U324) and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| XLT | 2007-2017 | 17x7.5 +44 |
| Eddie Bauer | 2007-2014 | 17x7.5 +44 |
| Limited | 2007-2017 | 17x7.5 +44 |
| King Ranch | 2007-2017 | See factory sizes below |
| Platinum | 2015-2017 | See factory sizes below |
| EL | 2007-2017 | See factory sizes below |
Wheel sizes Ford fitted to the 2007-2017 Ford Expedition from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +44 |
| 17x8 +44 |
| 18x8.5 +44 |
| 20x8.5 +44 |
| 22x9.5 +44 |
Widths and offsets with Verified Fitment on the 2007-2017 Ford Expedition: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 7.5" | +14 to +54 |
| 17-22" | 8" | +20 to +56 |
| 17-22" | 8.5" | +27 to +49 |
| 17-22" | 9" | +33 to +43 |
Wider still: 17x10 +25 to +36; 18x10 +25 to +36; 19x10 +25 to +36; 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36 fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).
The 2007-2017 Ford Expedition (U324) uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 17x7.5 +44; 17x8 +44; 18x8.5 +44; 20x8.5 +44; 22x9.5 +44.
Its wheel fasteners use a M14x2.0 thread.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.