Ford Explorer 5th Gen (U502) 2011-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Explorer built from 2011 to 2019 (Base, XLT, Limited, Sport, Platinum, Police Interceptor Utility).

Fitment specs

Bolt pattern5X114.3
Center bore63.4 mm
Lug thread1/2"-20UNF
Model years2011-2019
Generation5th Gen (U502)

Every 2011-2019 Ford Explorer uses a 5X114.3 bolt pattern with a 63.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 63.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford Explorer (5th Gen (U502)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2011-201917x7.5 +44
18x8 +44
XLT2011-201918x8 +44
Limited2011-201920x8.5 +44
Sport2013-201920x8.5 +44
Platinum2016-201920x8.5 +44
Police Interceptor Utility2013-2019See factory sizes below

Factory wheel sizes

Wheel sizes Ford fitted to the 2011-2019 Ford Explorer from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +44
18x8 +44
20x8.5 +44
20x9 +40
20x9 +44

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2019 Ford Explorer: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Police Interceptor Utility

DiameterWidthOffset range
17-22"7.5"+14 to +54
17-22"8"+20 to +56
17-22"8.5"+27 to +49
17-22"9"+33 to +43

Wider still: 17x10 +25 to +36; 18x10 +25 to +36; 19x10 +25 to +36; 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

XLT

DiameterWidthOffset range
18-22"8"+20 to +54
18-22"8.5"+27 to +49
18-22"9"+33 to +43

Wider still: 18x10 +25 to +36; 19x10 +25 to +36; 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

Limited, Sport, Platinum

DiameterWidthOffset range
20-22"8.5"+27 to +49
20-22"9"+33 to +43

Wider still: 20x10 +25 to +36; 21x10 +25 to +36; 22x10 +25 to +36 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2019 Ford Explorer. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Police Interceptor Utility

Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)

XLT

Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)

Limited, Sport, Platinum

FAQ

What is the bolt pattern of the 2011-2019 Ford Explorer?

The 2011-2019 Ford Explorer (5th Gen (U502)) uses a 5X114.3 bolt pattern and a 63.4 mm center bore.

What size wheels came on the 2011-2019 Ford Explorer from the factory?

Factory sizes: 17x7.5 +44; 18x8 +44; 20x8.5 +44; 20x9 +40; 20x9 +44.

What lug thread size does the 2011-2019 Ford Explorer use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 2011-2019 Ford Explorer without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.