Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford Explorer built from 2020 to 2026 (Base, Active, XLT, ST-Line, Limited, Timberline, ST, King Ranch, Platinum, Hybrid, Police Interceptor Utility).
Every 2020-2026 Ford Explorer uses a 5X114.3 bolt pattern with a 70.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford Explorer (6th Gen (U625)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2020-2023 | 18x7.5 +37 18x7.5 +37.5 |
| Active | 2025-2026 | 18x7.5 +37 |
| XLT | 2020-2024 | 18x7.5 +37 18x7.5 +37.5 |
| ST-Line | 2022-2026 | 20x8 +37 20x8 +37.5 20x8.5 +37 20x8.5 +40 |
| Limited | 2020-2024 | 20x8 +37 20x8 +37.5 20x8.5 +37 20x8.5 +40 |
| Timberline | 2021-2024 | 18x8 +37 |
| ST | 2020-2026 | 20x8 +37 20x8 +37.5 20x8.5 +37 20x8.5 +40 21x9 +37 21x9 +37.5 |
| King Ranch | 2021-2024 | 20x8 +37 20x8 +37.5 20x8.5 +37 20x8.5 +40 |
| Platinum | 2020-2026 | 20x8 +37 20x8 +37.5 20x8.5 +37 20x8.5 +40 21x9 +37 21x9 +37.5 |
| Hybrid | 2020-2026 | See factory sizes below |
| Police Interceptor Utility | 2020-2026 | See factory sizes below |
Wheel sizes Ford fitted to the 2020-2026 Ford Explorer from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +37 |
| 18x8 +37 |
| 20x8 +37 |
| 20x8.5 +37 |
| 20x8.5 +40 |
| 21x8.5 +37 |
| 21x8.5 +40 |
| 21x9 +37 |
Widths and offsets with Verified Fitment on the 2020-2026 Ford Explorer: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 7.5" | +7 to +47 |
| 18-22" | 8" | +13 to +52 |
| 18-22" | 8.5" | +20 to +45 |
| 18-22" | 9" | +26 to +39 |
| 18-22" | 9.5" | +33 |
Wider still: 18x10 +18 to +32; 18x10.5 +25 to +26; 19x10 +18 to +32; 19x10.5 +25 to +26; 20x10 +18 to +32; 20x10.5 +25 to +26… fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 8" | +13 to +47 |
| 20-22" | 8.5" | +20 to +45 |
| 20-22" | 9" | +26 to +39 |
| 20-22" | 9.5" | +33 |
Wider still: 20x10 +18 to +32; 20x10.5 +25 to +26; 21x10 +18 to +32; 21x10.5 +25 to +26; 22x10 +18 to +32; 22x10.5 +25 to +26 fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 8" | +13 to +47 |
| 18-22" | 8.5" | +20 to +45 |
| 18-22" | 9" | +26 to +39 |
| 18-22" | 9.5" | +33 |
Wider still: 18x10 +18 to +32; 18x10.5 +25 to +26; 19x10 +18 to +32; 19x10.5 +25 to +26; 20x10 +18 to +32; 20x10.5 +25 to +26… fit with modifications (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Ford Explorer. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)























Modifications Required (roll fender lips, trim front fender liner and bumper cover edge, camber correction kit for wider wheels)






The 2020-2026 Ford Explorer (6th Gen (U625)) uses a 5X114.3 bolt pattern and a 70.6 mm center bore.
Factory sizes: 18x7.5 +37; 18x8 +37; 20x8 +37; 20x8.5 +37; 20x8.5 +40; 21x8.5 +37; 21x8.5 +40; 21x9 +37.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.