Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the GMC Canyon built from 2004 to 2012 (SL, SL Z71, SLE, SLE Z71, SLE Sport, SLT, SLT Sport, SLT Z71, WT, SLE ZQ8, SLT ZQ8).
Every 2004-2012 GMC Canyon uses a 6X139.7 bolt pattern with a 100.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 100.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the GMC Canyon (GMT355) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SL | 2004-2008 | See factory sizes below |
| SL Z71 | 2004-2008 | See factory sizes below |
| SLE | 2004-2012 | See factory sizes below |
| SLE Z71 | 2004-2012 | 17x7 +25 17x7 +33 17x7 +40 17x7.5 +33 17x8 +28 |
| SLE Sport | 2006-2007 | 17x7.5 +33 17x8 +28 |
| SLT | 2006-2012 | See factory sizes below |
| SLT Sport | 2006-2007 | 17x7.5 +33 17x8 +28 |
| SLT Z71 | 2006-2012 | 17x7 +25 17x7 +33 17x7 +40 17x7.5 +33 |
| WT | 2006-2012 | See factory sizes below |
| SLE ZQ8 | 2009-2012 | 18x7.5 +25 18x7.5 +30 18x7.5 +40 18x8 +28 18x8 +35 |
| SLT ZQ8 | 2010-2012 | 18x7.5 +25 18x7.5 +30 18x7.5 +40 18x8 +28 18x8 +35 |
Wheel sizes GMC fitted to the 2004-2012 GMC Canyon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +33 |
| 15x6.5 +23 |
| 15x6.5 +25 |
| 15x7 +25 |
| 15x7 +33 |
| 16x6.5 +23 |
| 16x6.5 +25 |
| 16x6.5 +41 |
| 16x7 +25 |
| 16x7 +28 |
| 16x7.5 +25 |
| 16x7.5 +33 |
| 17x7 +25 |
| 17x7 +33 |
| 17x7 +40 |
| 17x7.5 +33 |
| 17x8 +28 |
| 18x7.5 +25 |
| 18x7.5 +30 |
| 18x7.5 +40 |
| 18x8 +28 |
| 18x8 +35 |
| 19x8 +30 |
| 19x8.5 +25 |
| 19x8.5 +28 |
| 20x8 +25 |
| 20x9 +25 |
Widths and offsets with Verified Fitment on the 2004-2012 GMC Canyon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-19" | 6" | -1 to +43 |
| 15-19" | 6.5" | +6 to +46 |
| 15-19" | 7" | +12 to +40 |
| 15-19" | 7.5" | +19 to +34 |
| 15-19" | 8" | +25 to +27 |
Wider still: 15x8.5 +11 to +27; 15x9 +17 to +21; 16x8.5 +11 to +27; 16x9 +17 to +21; 17x8.5 +11 to +27; 17x9 +17 to +21… fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 17-19" | 7" | +12 to +35 |
| 17-19" | 7.5" | +19 to +34 |
| 17-19" | 8" | +25 to +27 |
Wider still: 17x8.5 +11 to +27; 17x9 +17 to +21; 18x8.5 +11 to +27; 18x9 +17 to +21; 19x8.5 +11 to +27; 19x9 +17 to +21 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 17-19" | 7.5" | +19 to +34 |
| 17-19" | 8" | +25 to +27 |
Wider still: 17x8.5 +11 to +27; 17x9 +17 to +21; 18x8.5 +11 to +27; 18x9 +17 to +21; 19x8.5 +11 to +27; 19x9 +17 to +21 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
| Diameter | Width | Offset range |
|---|---|---|
| 18-19" | 7.5" | +19 to +34 |
| 18-19" | 8" | +25 to +27 |
Wider still: 18x8.5 +11 to +27; 18x9 +17 to +21; 19x8.5 +11 to +27; 19x9 +17 to +21 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).
The 2004-2012 GMC Canyon (GMT355) uses a 6X139.7 bolt pattern and a 100.3 mm center bore.
Factory sizes: 15x6 +33; 15x6.5 +23; 15x6.5 +25; 15x7 +25; 15x7 +33; 16x6.5 +23; 16x6.5 +25; 16x6.5 +41; 16x7 +25; 16x7 +28; 16x7.5 +25; 16x7.5 +33; 17x7 +25; 17x7 +33; 17x7 +40; 17x7.5 +33; 17x8 +28; 18x7.5 +25; 18x7.5 +30; 18x7.5 +40; 18x8 +28; 18x8 +35; 19x8 +30; 19x8.5 +25; 19x8.5 +28; 20x8 +25; 20x9 +25.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.