GMC Canyon 3rd Gen (31XX-2) 2023-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the GMC Canyon built from 2023 to 2026 (AT4, AT4X, Denali, Elevation, AT4X AEV).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2023-2026
Generation3rd Gen (31XX-2)

Every 2023-2026 GMC Canyon uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Canyon (3rd Gen (31XX-2)) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
AT42023-2026
AT4X2023-2026
Denali2023-2026
Elevation2023-2026
AT4X AEV2024-2026

Factory wheel sizes

Wheel sizes GMC fitted to the 2023-2026 GMC Canyon from the factory. Offsets are ET in millimeters.

Factory size
17x8 +24
18x8.5 +26
20x9 +28
22x9 +28

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2023-2026 GMC Canyon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-22"8"-2 to +34
17-22"8.5"+5 to +40
17-22"9"+11 to +33
17-22"9.5"+17 to +27

Wider still: 17x10.5 +9 to +20; 18x10.5 +9 to +20; 19x10.5 +9 to +20; 20x10.5 +9 to +20; 21x10.5 +9 to +20; 22x10.5 +9 to +20 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 GMC Canyon. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

FAQ

What is the bolt pattern of the 2023-2026 GMC Canyon?

The 2023-2026 GMC Canyon (3rd Gen (31XX-2)) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2023-2026 GMC Canyon from the factory?

Factory sizes: 17x8 +24; 18x8.5 +26; 20x9 +28; 22x9 +28.

What lug thread size does the 2023-2026 GMC Canyon use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2023-2026 GMC Canyon without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.