GMC Canyon (GMT 31XX) 2015-2022 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the GMC Canyon built from 2015 to 2022 (Base, SL, SLE, SLT, All Terrain, Denali, Elevation, AT4).

Fitment specs

Bolt pattern6X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2015-2022
GenerationGMT 31XX

Every 2015-2022 GMC Canyon uses a 6X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the GMC Canyon (GMT 31XX) and the model years each was sold. All of them share the 6X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2015-2020See factory sizes below
SL2015-202016x7 +33
SLE2015-202017x8 +33
SLT2015-202018x8.5 +33
All Terrain2017-202017x8 +33
Denali2017-202220x8.5 +33
Elevation2021-202218x8.5 +33
AT42021-202217x8 +33

Factory wheel sizes

Wheel sizes GMC fitted to the 2015-2022 GMC Canyon from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +33
17x8 +33
18x8.5 +33
19x8.5 +33
20x8.5 +33

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2022 GMC Canyon: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, SL

DiameterWidthOffset range
16-20"7"-3 to +43
16-20"7.5"+3 to +49
16-20"8"+9 to +45
16-20"8.5"+16 to +38
16-20"9"+22 to +32

Wider still: 16x10 +14 to +25; 17x10 +14 to +25; 18x10 +14 to +25; 19x10 +14 to +25; 20x10 +14 to +25 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

SLE, All Terrain, AT4

DiameterWidthOffset range
17-20"8"+9 to +43
17-20"8.5"+16 to +38
17-20"9"+22 to +32

Wider still: 17x10 +14 to +25; 18x10 +14 to +25; 19x10 +14 to +25; 20x10 +14 to +25 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

SLT, Elevation

DiameterWidthOffset range
18-20"8.5"+16 to +38
18-20"9"+22 to +32

Wider still: 18x10 +14 to +25; 19x10 +14 to +25; 20x10 +14 to +25 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

Denali

DiameterWidthOffset range
20"8.5"+16 to +38
20"9"+22 to +32

Wider still: 20x10 +14 to +25 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2015-2022 GMC Canyon?

The 2015-2022 GMC Canyon (GMT 31XX) uses a 6X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2015-2022 GMC Canyon from the factory?

Factory sizes: 16x7 +33; 17x8 +33; 18x8.5 +33; 19x8.5 +33; 20x8.5 +33.

What lug thread size does the 2015-2022 GMC Canyon use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2015-2022 GMC Canyon without modifications?

Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.