Honda Accord (CG) 1998-2002 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Accord built from 1998 to 2002 (DX, LX, EX, SE, LX V6, EX V6).

Fitment specs

Bolt pattern4X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years1998-2002
GenerationCG

Every 1998-2002 Honda Accord uses a 4X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Accord (CG) and the model years each was sold. All of them share the 4X114.3 bolt pattern.

SubmodelYears
DX1998-2002
LX1998-2002
EX1998-2002
SE2001-2002
LX V61998-2002
EX V61998-2002

Factory wheel sizes

Wheel sizes Honda fitted to the 1998-2002 Honda Accord from the factory. Offsets are ET in millimeters.

Factory size
14x5.5 +55
15x6 +55
16x6.5 +55
17x6.5 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1998-2002 Honda Accord: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"5.5"+12 to +65
14-17"6"+18 to +67
14-17"6.5"+25 to +60
14-17"7"+31 to +54
14-17"7.5"+38 to +47

Wider still: 14x8 +19 to +41; 14x8.5 +26 to +35; 15x8 +19 to +41; 15x8.5 +26 to +35; 16x8 +19 to +41; 16x8.5 +26 to +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

FAQ

What is the bolt pattern of the 1998-2002 Honda Accord?

The 1998-2002 Honda Accord (CG) uses a 4X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 1998-2002 Honda Accord from the factory?

Factory sizes: 14x5.5 +55; 15x6 +55; 16x6.5 +55; 17x6.5 +55.

What lug thread size does the 1998-2002 Honda Accord use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1998-2002 Honda Accord without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.