Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Accord built from 2008 to 2012 (LX, LX-P, LX-S, SE, EX, EX-L, EX V6, EX-L V6).
Every 2008-2012 Honda Accord uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Accord (8th Gen (CP/CS)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2008-2012 |
| LX-P | 2008-2012 |
| LX-S | 2008-2012 |
| SE | 2011-2012 |
| EX | 2008-2012 |
| EX-L | 2008-2012 |
| EX V6 | 2008-2012 |
| EX-L V6 | 2008-2012 |
Wheel sizes Honda fitted to the 2008-2012 Honda Accord from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +50 |
| 17x7.5 +55 |
| 18x7.5 +55 |
| 18x8 +55 |
| 19x8 +55 |
Widths and offsets with Verified Fitment on the 2008-2012 Honda Accord: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 6.5" | +10 to +60 |
| 16-19" | 7" | +16 to +66 |
| 16-19" | 7.5" | +23 to +64 |
| 16-19" | 8" | +29 to +58 |
| 16-19" | 8.5" | +35 to +51 |
Wider still: 16x9 +13 to +47; 16x9.5 +19 to +41; 16x10 +25 to +35; 17x9 +13 to +47; 17x9.5 +19 to +41; 17x10 +25 to +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2008-2012 Honda Accord. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)










The 2008-2012 Honda Accord (8th Gen (CP/CS)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 16x6.5 +50; 17x7.5 +55; 18x7.5 +55; 18x8 +55; 19x8 +55.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.