Honda Accord 7th Gen (CM) 2003-2007 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Accord built from 2003 to 2007 (DX, LX, SE, EX, EX-L, LX V6, EX V6, Hybrid).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2003-2007
Generation7th Gen (CM)

Every 2003-2007 Honda Accord uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Accord (7th Gen (CM)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
DX2003-2007See factory sizes below
LX2003-2007See factory sizes below
SE2005-2007See factory sizes below
EX2003-2007See factory sizes below
EX-L2003-2007See factory sizes below
LX V62003-2007See factory sizes below
EX V62003-2007See factory sizes below
Hybrid2005-200716x6.5 +55

Factory wheel sizes

Wheel sizes Honda fitted to the 2003-2007 Honda Accord from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +55
16x6.5 +55
17x6.5 +55
17x7 +55
17x7.5 +50
18x7 +50
18x7.5 +50
19x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2003-2007 Honda Accord: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DX, LX, SE, EX, EX-L, LX V6, EX V6

DiameterWidthOffset range
15-18"6"+10 to +65
15-18"6.5"+16 to +64
15-18"7"+23 to +57
15-18"7.5"+29 to +51
15-18"8"+35 to +45

Wider still: 15x8.5 +24 to +44; 15x9 +30 to +38; 16x8.5 +24 to +44; 16x9 +30 to +38; 17x8.5 +24 to +44; 17x9 +30 to +38… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Hybrid

DiameterWidthOffset range
16-18"6.5"+21 to +61
16-18"7"+28 to +54
16-18"7.5"+34 to +48
16-18"8"+40 to +42

Wider still: 16x8.5 +29 to +41; 16x9 +35; 17x8.5 +29 to +41; 17x9 +35; 18x8.5 +29 to +41; 18x9 +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2003-2007 Honda Accord. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

DX, LX, SE, EX, EX-L, LX V6, EX V6

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

Hybrid

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2003-2007 Honda Accord?

The 2003-2007 Honda Accord (7th Gen (CM)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2003-2007 Honda Accord from the factory?

Factory sizes: 15x6.5 +55; 16x6.5 +55; 17x6.5 +55; 17x7 +55; 17x7.5 +50; 18x7 +50; 18x7.5 +50; 19x8 +50.

What lug thread size does the 2003-2007 Honda Accord use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2003-2007 Honda Accord without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.