Honda CR-V 5th Gen (RW) 2017-2022 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda CR-V built from 2017 to 2022 (LX, Special Edition, EX, EX-L, Touring, Hybrid EX, Hybrid EX-L, Hybrid Touring).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2017-2022
Generation5th Gen (RW)

Every 2017-2022 Honda CR-V uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda CR-V (5th Gen (RW)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
LX2017-202217x7.5
17x7.5 +45
Special Edition2020-202217x7.5
17x7.5 +45
EX2017-202218x7.5 +40
18x7.5 +45
EX-L2017-202218x7.5 +40
18x7.5 +45
Touring2017-202219x7.5 +40
19x7.5 +45
Hybrid EX2020-2022See factory sizes below
Hybrid EX-L2020-2022See factory sizes below
Hybrid Touring2020-2022See factory sizes below

Factory wheel sizes

Wheel sizes Honda fitted to the 2017-2022 Honda CR-V from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +45
18x7.5 +40
18x7.5 +45
19x7.5 +40
19x7.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2022 Honda CR-V: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LX, Special Edition, Hybrid EX, Hybrid EX-L, Hybrid Touring

DiameterWidthOffset range
17-20"7.5"+23 to +52
17-20"8"+29 to +46
17-20"8.5"+35 to +39

Wider still: 17x9 +32 to +35; 18x9 +32 to +35; 19x9 +32 to +35; 20x9 +32 to +35; 21x9 +32 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

EX, EX-L

DiameterWidthOffset range
18-20"7.5"+23 to +50
18-20"8"+29 to +46
18-20"8.5"+35 to +39

Wider still: 18x9 +32 to +35; 19x9 +32 to +35; 20x9 +32 to +35; 21x9 +32 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Touring

DiameterWidthOffset range
19-20"7.5"+23 to +50
19-20"8"+29 to +46
19-20"8.5"+35 to +39

Wider still: 19x9 +32 to +35; 20x9 +32 to +35; 21x9 +32 to +35 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2022 Honda CR-V. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

LX, Special Edition, Hybrid EX, Hybrid EX-L, Hybrid Touring

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

EX, EX-L

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

Touring

FAQ

What is the bolt pattern of the 2017-2022 Honda CR-V?

The 2017-2022 Honda CR-V (5th Gen (RW)) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2017-2022 Honda CR-V from the factory?

Factory sizes: 17x7.5 +45; 18x7.5 +40; 18x7.5 +45; 19x7.5 +40; 19x7.5 +45.

What lug thread size does the 2017-2022 Honda CR-V use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2017-2022 Honda CR-V without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.