Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Odyssey built from 2024 to 2025 (EX, EX-L, Sport, Sport-L, TrailSport, Touring, Elite).
Every 2024-2025 Honda Odyssey uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Odyssey (RL6) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| EX | 2024 |
| EX-L | 2024-2025 |
| Sport | 2024 |
| Sport-L | 2025 |
| TrailSport | 2025 |
| Touring | 2024-2025 |
| Elite | 2024-2025 |
Wheel sizes Honda fitted to the 2024-2025 Honda Odyssey from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +55 |
| 18x7 +55 |
Widths and offsets with Verified Fitment on the 2024-2025 Honda Odyssey: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-19" | 7" | +38 to +60 |
| 17-19" | 7.5" | +44 to +54 |
Wider still: 17x8.5 +36 to +47; 18x8.5 +36 to +47; 19x8.5 +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2025 Honda Odyssey. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)





The 2024-2025 Honda Odyssey (RL6) uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 17x7 +55; 18x7 +55.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.