Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Odyssey built from 2018 to 2023 (LX, EX, EX-L, Sport, Touring, Elite).
Every 2018-2023 Honda Odyssey uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Odyssey (5th Gen (RL6)) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2018-2022 |
| EX | 2018-2023 |
| EX-L | 2018-2023 |
| Sport | 2022-2023 |
| Touring | 2018-2023 |
| Elite | 2018-2023 |
Wheel sizes Honda fitted to the 2018-2023 Honda Odyssey from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +50 |
| 19x7.5 +50 |
Widths and offsets with Verified Fitment on the 2018-2023 Honda Odyssey: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7.5" | +23 to +57 |
| 18-20" | 8" | +29 to +51 |
| 18-20" | 8.5" | +36 to +44 |
Wider still: 18x9 +27 to +49; 18x9.5 +34 to +42; 19x9 +27 to +49; 19x9.5 +34 to +42; 20x9 +27 to +49; 20x9.5 +34 to +42… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2018-2023 Honda Odyssey. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.




Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)












The 2018-2023 Honda Odyssey (5th Gen (RL6)) uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 18x7.5 +50; 19x7.5 +50.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.