Jeep Wrangler (YJ) 1987-1995 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Wrangler built from 1987 to 1995 (S, Base, SE, Sport, Islander, Renegade, Rio Grande, Laredo, Sahara).

Fitment specs

Bolt pattern5X114.3
Center bore71.5 mm
Lug thread1/2"-20UNF
Model years1987-1995
GenerationYJ

Every 1987-1995 Jeep Wrangler uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Jeep Wrangler (YJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
S1987-199515x6.5 +25
15x7 +25
Base1987-1995See factory sizes below
SE1992-199515x6.5 +25
15x7 +25
Sport1988-199515x6.5 +25
15x7 +25
Islander1988-199315x6.5 +25
15x7 +25
Renegade1991-199415x6.5 +25
15x7 +25
Rio Grande199515x6.5 +25
15x7 +25
Laredo1987-199015x6.5 +25
15x7 +25
Sahara1988-199515x6.5 +25
15x7 +25

Factory wheel sizes

Wheel sizes Jeep fitted to the 1987-1995 Jeep Wrangler from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +25
15x7 +25
16x6.5 +25
16x7 +25
16x7.5 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1987-1995 Jeep Wrangler: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"6.5"+8 to +30
15-18"7"+14 to +24

Wider still: 15x8 +6 to +17; 16x8 +6 to +17; 17x8 +6 to +17; 18x8 +6 to +17 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1987-1995 Jeep Wrangler?

The 1987-1995 Jeep Wrangler (YJ) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 1987-1995 Jeep Wrangler from the factory?

Factory sizes: 15x6.5 +25; 15x7 +25; 16x6.5 +25; 16x7 +25; 16x7.5 +30.

What lug thread size does the 1987-1995 Jeep Wrangler use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 1987-1995 Jeep Wrangler without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.