Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Wrangler built from 2018 to 2026 (Sport, Sport S, Willys, Sahara, High Altitude, Rubicon, Rubicon X, 4xe, Rubicon 392).
Every 2018-2026 Jeep Wrangler uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Jeep Wrangler (JL) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Sport | 2018-2026 | 17x7.5 +37 17x7.5 +37.17 17x7.5 +44.45 |
| Sport S | 2018-2026 | 17x7.5 +37 17x7.5 +37.17 17x7.5 +44.45 |
| Willys | 2020-2026 | 17x7.5 +37 17x7.5 +37.17 17x7.5 +44.45 |
| Sahara | 2018-2026 | 18x7.5 +44.45 |
| High Altitude | 2021-2026 | See factory sizes below |
| Rubicon | 2018-2026 | 17x7.5 +37 17x7.5 +37.17 |
| Rubicon X | 2024-2026 | 17x7.5 +37 |
| 4xe | 2021-2026 | See factory sizes below |
| Rubicon 392 | 2021-2025 | 17x7.5 +37 17x7.5 +37.17 |
Wheel sizes Jeep fitted to the 2018-2026 Jeep Wrangler from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +37 |
| 17x7.5 +44.45 |
| 18x7.5 +44.45 |
| 20x8 +44.45 |
Widths and offsets with Verified Fitment on the 2018-2026 Jeep Wrangler: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7.5" | +20 to +47 |
| 17-18" | 8" | +26 to +44 |
| 17-18" | 8.5" | +33 to +37 |
Wider still: 17x9 +18 to +37; 17x9.5 +25 to +30; 18x9 +18 to +37; 18x9.5 +25 to +30 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 18" | 7.5" | +20 to +50 |
| 18" | 8" | +26 to +44 |
| 18" | 8.5" | +33 to +37 |
Wider still: 18x9 +18 to +37; 18x9.5 +25 to +30 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2018-2026 Jeep Wrangler (JL) uses a 5X127 bolt pattern and a 71.5 mm center bore.
Factory sizes: 17x7.5 +37; 17x7.5 +44.45; 18x7.5 +44.45; 20x8 +44.45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.